SOFTER — STRONGER — SMARTER
Find the right suspension parts.
70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER Shock absorber bushes are the polyurethane bush kits used to replace worn rubber bushes at the upper and lower mounting positions of shock absorbers and struts. Every shock absorber operates through two mounting points, and the bushes at each end are the sole compliant interface betw... Read more
70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER Shock absorber bushes are the polyurethane bush kits used to replace worn rubber bushes at the upper and lower mounting positions of shock absorbers and struts. Every shock absorber operates through two mounting points, and the bushes at each end are the sole compliant interface between the shock absorber body and the chassis or suspension arm. They allow the controlled angular movement required as the shock cycles through its travel while isolating the mount from vibration and road noise. As these bushes wear and crack, increasing movement and harshness is transmitted directly through the shock absorber mounting interfaces into the chassis, degrading ride quality, handling precision and NVH.
Quality 70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER polyurethane replacement shock absorber bush kits restore correct compliance and isolation at each mounting position, reducing transmitted harshness and ensuring the shock absorber operates through its designed travel range without bind or play at the mount. The 70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER range covers front and rear upper and lower shock absorber positions, shock absorber control arm mounting positions, and universal bush kits in a range of sizes for non-specific applications. Installation guides are available across most products. Most products are backed by a lifetime warranty.
Shock absorber bushes at both the upper and lower mounting positions are subject to continuous angular deflection, vibration and environmental exposure throughout the 70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER’s service life. Factory rubber bushes deteriorate progressively, hardening and cracking until they begin to transmit shock absorber inputs directly into the chassis instead of isolating them. The result is increased harshness over road irregularities, knocking or clunking from the shock absorber mounting position under suspension travel, and reduced shock absorber effectiveness as mounting compliance degrades.
Replacing worn shock absorber bushes with correctly specified polyurethane alternatives restores correct angular compliance and isolation at each mounting position, eliminating mount noise and transmitted harshness and allowing the shock absorber to operate through its full travel range with correct articulation at both ends. Polyurethane shock absorber bushes resist oil, heat and environmental exposure more effectively than factory rubber alternatives, maintaining their compliance characteristics for longer and reducing the frequency of replacement over the 70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER's service life.
The 70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER shock absorber bushes range includes:
Worn shock absorber bushes are a frequently overlooked source of mount noise, transmitted harshness and reduced shock absorber effectiveness that is often misattributed to the shock absorber itself. Renewing them with correctly specified polyurethane alternatives restores correct mounting compliance and isolation, eliminates mount noise and harshness and returns the shock absorber to full effectiveness without requiring shock absorber replacement.
For workshops carrying out shock absorber replacement or suspension servicing, 70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER shock absorber bush renewal is a low-cost step that ensures the new or existing shock absorber is correctly supported at both mounting positions, preventing premature mount wear and delivering the correct compliance for the shock absorber to perform as designed.
70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER Shock absorber bush kits are designed for accurate installation at the upper and lower shock absorber mounting positions. Installation times range from approximately half an hour to three hours depending on the application and mounting position. Installation guides are available across most products to support both professional workshops and experienced DIY users. For additional technical assistance, a dedicated support team is available to help ensure correct product selection for the specific vehicle and shock absorber mounting configuration.
70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER Shock absorber bushes are manufactured from high-strength polyurethane engineered to withstand the angular deflection, vibration and environmental exposure that shock absorber mounting positions are subject to in everyday and demanding use. Resistant to oil, heat and road contaminants, polyurethane shock absorber bushes maintain their compliance and isolation characteristics for longer than factory rubber alternatives, delivering more consistent shock absorber mounting performance throughout their service life. Most products are backed by a lifetime warranty.
70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER Shock absorber bushes are a practical solution for:
The right shock absorber bush kit restores correct mounting compliance and isolation at every renewed position, eliminates mount noise and transmitted harshness and allows the shock absorber to deliver its full performance every time.
Explore the full 70, 73 Series Bundera (Coil Springs Front & Rear) LAND CRUISER shock absorber bushes range and find the right kit for your vehicle. With front and rear upper and lower bush kits, shock absorber to control arm bush kits, general multi-platform kits and universal bush kits in a range of sizes across a broad range of suspension applications, you can renew every shock absorber mounting position accurately and complete every suspension service with confidence.
Front Suspension
Front Suspension
Rear Suspension
Rear Suspension
Qty Required 1 |
|---|
Kit Contents 8 Bushings |
Qty Required 1 |
|---|
Kit Contents 8 Bushings |
Qty Required 2 |
|---|
Kit Contents 4 Bushings |
Qty Required 1 |
|---|
Kit Contents 2 Bushings, 4 Clamps |
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Front Panhard Rod - Bushing Kit to Suit Toyota Land Cruiser 76, 78, 79, 80 and 105 Series
1 month ago from London, GBFront and Rear Essential Vehicle Kit to Suit Toyota Land Cruiser 80 and 105 Series
2 months ago from London, GBFront Upper Control Arm - Bushing Kit to Suit Ford Everest, Ranger and Mazda BT-50
3 weeks ago from Mount Hope , TT
UK
Australia
Europe
United States