Anti Roll Bar Bushes with Fitting Position Rear Axle for Vehicle

Anti roll bar bushes are the polyurethane bush kits used to replace worn rubber bushes at the anti roll bar chassis mount positions and anti roll bar link pivot positions. The anti roll bar, also called an anti-roll bar, connects the left and right sides of the suspension to resist body roll during cornering, and the mount bushes at the chassis bracket positions are the primary means by which the bar is located and through which its torsional loads are transferred to the chassis. Worn anti roll bar mount bushes allow the bar to shift and knock in its brackets, reducing its effectiveness and introducing metallic clunking and increased body roll that worsens progressively.

At the anti roll bar link end, worn link bushes allow play to develop between the link and the bar or the control arm, contributing to knocking under suspension travel and reduced anti roll bar response. Quality polyurethane replacement anti roll bar mount and link bush kits restore correct bar location and link pivot compliance, eliminating mount noise and improving anti roll bar effectiveness and handling balance across all driving conditions. The range covers front and rear anti roll bar mount positions, front and rear anti roll bar link upper and lower positions, anti roll bar to control arm positions, and a comprehensive range of universal mount bush kits in dimensionally specified sizes. Installation time is approximately one hour per kit. All products are backed by a lifetime warranty.

Why Upgrade Suspension?

Anti roll bar mount and link bushes are among the most frequently worn and replaced suspension bushes on any vehicle, yet they are also among the most overlooked until failure is obvious. Factory rubber anti roll bar mount bushes compress and harden over time, losing their grip on the bar and allowing it to move within the bracket. The early signs, including a faint knocking or tapping from the front or rear suspension over small bumps, are often normalised before the underlying cause is addressed.

Replacing worn anti roll bar bushes with correctly sized polyurethane alternatives restores the correct interference fit between the bush and the bar, securing the bar within its bracket and eliminating mount noise immediately. Polyurethane anti roll bar bushes also grip the bar more consistently than rubber under torsional load, delivering more immediate and precise anti roll bar response that directly improves cornering balance and body roll control.

Anti Roll Bar Bush Range

The anti roll bar bush range includes:

• Front Anti roll bar Mount Bush Kits: Vehicle-matched polyurethane bush kits for the front anti roll bar chassis bracket mounting positions, available in the specific diameter required for the applicable vehicle and anti roll bar.
• Rear Anti roll bar Mount Bush Kits: Vehicle-matched polyurethane bush kits for the rear anti roll bar chassis bracket mounting positions, available in the specific diameter required for the applicable vehicle and anti roll bar.
• Front Anti roll bar Link Bush Kits: Bush kits for the front anti roll bar link upper and lower pivot positions, restoring correct link compliance and eliminating play between the link and the bar or control arm.
• Rear Anti roll bar Link Bush Kits: Bush kits for the rear anti roll bar link upper and lower pivot positions on applicable platforms.
• Anti roll bar to Control Arm Bush Kits: Bush kits for the anti roll bar direct-to-control arm mounting position on applicable platforms where the anti roll bar connects directly to the arm without a separate link.
• Universal Anti roll bar Mount Bush Kits: Dimensionally specified polyurethane mount bush kits in a range of diameters for non-vehicle-specific anti roll bar mounting applications, including aftermarket and custom anti roll bar fitments.

Why Purchase Anti Roll Bar Bushes?

Worn anti roll bar mount and link bushes are the most common cause of the suspension knocking and clunking that workshops encounter on everyday vehicles, yet the repair is straightforward and the result is immediate. Renewing worn bushes with correctly sized polyurethane alternatives eliminates mount noise, restores correct bar location and link compliance, and returns the anti roll bar to full effectiveness in a single short service.

For workshops, anti roll bar bush replacement is a high-frequency, high-impact service that delivers a noticeable and immediate improvement in NVH and handling character with minimal labour time. For vehicle owners, a correctly specified polyurethane anti roll bar bush kit ensures the bar is properly gripped throughout its service life, maintaining consistent cornering balance and roll control for longer than factory rubber alternatives.

Compatible Vehicles

Anti roll bar bushes suit a wide range of vehicles, including:

• Passenger cars, wagons and SUVs requiring front or rear anti roll bar mount or link bush replacement at the chassis bracket or link pivot positions.
• Classic and performance vehicles requiring anti roll bar mount and link bush renewal as part of a suspension overhaul or to improve roll control and handling balance.
• 4WDs and off-road vehicles requiring front or rear anti roll bar mount or link bush renewal following wear or suspension modification.
• Commercial vans and utes requiring anti roll bar mount bush replacement to restore correct bar location and reduce NVH.
• Any vehicle fitted with a standard or aftermarket anti roll bar requiring mount bush replacement at any diameter, including applications where universal dimensionally specified bush kits are appropriate.

Installation and Support

Anti roll bar bush kits are designed for accurate installation at the front and rear anti roll bar chassis bracket and link pivot positions. Installation time is approximately one hour per kit. The correct mount bush diameter must be matched to the anti roll bar diameter for the specific vehicle and application. Universal mount bush kits are available in a range of diameters to accommodate non-vehicle-specific fitments. For additional technical assistance, a dedicated support team is available to help ensure correct product selection and sizing for the specific application.

Repair and Upgrade

Anti roll bar bushes are manufactured from high-strength polyurethane engineered to withstand the torsional load, vibration and environmental exposure that anti roll bar mount and link positions are subject to in everyday and demanding use. Resistant to oil, heat and road contaminants, polyurethane anti roll bar bushes grip the bar more consistently and maintain their compliance characteristics for longer than factory rubber alternatives, delivering more consistent anti roll bar response and reduced mount noise throughout their service life. All products are backed by a lifetime warranty.

Who Anti roll bar Bushes Are For

Anti roll bar bushes are a practical solution for:

• Professional workshops carrying out routine suspension servicing requiring correct polyurethane anti roll bar mount and link bush renewal to eliminate knocking, restore correct bar location and improve anti roll bar effectiveness.
• Experienced DIY users replacing worn front or rear anti roll bar mount or link bushes to eliminate suspension noise, restore correct roll control and improve cornering balance.
• Performance and enthusiast vehicle owners upgrading anti roll bar mount bushes to polyurethane to improve bar grip and deliver more immediate, consistent and precise anti roll bar response during cornering.
• Anyone fitting an aftermarket or upgraded anti roll bar requiring correctly sized polyurethane mount bushes from the universal range to suit the specific bar diameter.

The right anti roll bar bush kit restores correct bar location and link pivot compliance, eliminates mount noise and delivers more immediate, consistent and precise anti roll bar response through every corner.

Shop Anti roll bar Bushes

Explore the full anti roll bar bushes range and find the right kit for your vehicle. With front and rear anti roll bar mount bush kits in vehicle-matched diameters, front and rear link bush kits, anti roll bar to control arm kits and a comprehensive range of universal mount bush kits in sizes to suit standard and aftermarket anti roll bars, you can renew every anti roll bar mounting position accurately and complete every suspension service with confidence.