Fixed Anti Roll Bar Links with Fitting Position Rear Axle for HONDA CR-V RD4-RD7

RD4-RD7 CR-V Fixed anti roll links are the platform-specific, fixed-length heavy duty replacement anti roll links used to replace worn or failed factory anti roll links at the front and rear anti roll end positions. Each link connects the end of the anti roll to the suspension strut, control arm or hub carrier at the exact geometry required for the specific platform, transmitting the anti roll's torsional load to the suspension to resist body roll during cornering. Factory anti roll links use rubber-bushed or ball joint ends that wear and fail over time, introducing play and knock into the anti roll connection and progressively reducing the bar's roll resistance contribution.

Fixed-length replacement links are precision-manufactured to the correct length for the specific platform at standard ride height, with heavy duty ball joint ends in the correct orientation for each application. RD4-RD7 CR-V Ball joint configurations across the range include horizontal parallel, opposed 90-degree, opposed 67.5-degree, opposed 180-degree, and combined horizontal/vertical designs, each matched to the specific geometric requirements of the mounting positions on the applicable platform. Sold as a pair of two links. All products carry a three-year warranty.

Why Upgrade RD4-RD7 CR-V Suspension?

Anti roll link failure is one of the most common suspension faults diagnosed at service intervals. Factory links on higher-mileage vehicles wear at the ball joint or bush ends until play develops that allows the link to knock and rattle over bumps, and in more advanced cases the link can separate at the end fitting entirely, leaving the anti roll disconnected from the suspension on that side. A disconnected or heavily worn anti roll link reduces body roll resistance significantly during cornering and under lane-change inputs, with the degree of degradation directly proportional to the amount of play in the link ends.

RD4-RD7 CR-V fixed-length replacement links with correctly specified ball joint ends restore the direct, play-free connection between the anti roll end and the suspension, returning the bar's full roll resistance contribution and eliminating the link-related knock and rattle immediately upon installation.

RD4-RD7 CR-V Product Range

The RD4-RD7 CR-V fixed anti roll links range includes:

• RD4-RD7 CR-V Front Fixed Anti roll Links: Platform-specific fixed-length heavy duty ball joint front anti roll links at the correct length and ball joint orientation.
• RD4-RD7 CR-V Rear Fixed Anti roll Links: Platform-specific fixed-length heavy duty ball joint rear anti roll links at the correct length and ball joint orientation.
• RD4-RD7 CR-V Anti roll Link Assemblies: Complete anti roll link assembly replacements for applicable platforms where the factory link uses a specific end assembly configuration.

All products are supplied as a pair of two links and are specified to the correct length for the applicable platform at standard ride height.

Why Purchase RD4-RD7 CR-V Fixed Anti roll Links?

For RD4-RD7 CR-V at standard ride height, a fixed-length link at the correct dimension for the specific platform is the most direct, straightforward and cost-effective replacement solution. The correct length is pre-set at manufacture, meaning no adjustment is required during installation, the link fits the application geometry precisely and can be installed without measurement or setting. Heavy duty ball joint ends provide a direct, play-free anti roll connection that outlasts the factory rubber-bushed alternatives in everyday use.

For workshops replacing anti roll links at service intervals, having the correct RD4-RD7 CR-V platform-specific fixed link available ensures every replacement can be completed quickly and accurately, with the correct link length and ball joint orientation confirmed by the product specification rather than requiring measurement or selection from an adjustable range.

Installation and Support

RD4-RD7 CR-V Fixed anti roll links are designed for direct installation at the front and rear anti roll end mounting positions at standard ride height. Installation time is approximately one hour per kit. No length adjustment is required. The correct link is selected by matching the platform and axle position to the applicable product. For additional technical assistance, a dedicated support team is available to help confirm correct product selection for the specific vehicle and anti roll link configuration.

Repair and Upgrade

RD4-RD7 CR-V Fixed anti roll links are constructed with heavy duty ball joint ends at the correct orientation for each application, engineered to withstand the torsional and angular loads that anti roll link mounting positions are subject to in everyday use. The ball joint design provides a direct, play-free anti roll-to-suspension connection that resists wear more effectively than the rubber-bushed factory alternatives, delivering consistent anti roll response and reduced link noise throughout the service life of each installation. All products carry a three-year warranty.

Who RD4-RD7 CR-V Fixed Anti roll Links Are For

RD4-RD7 CR-V Fixed anti roll links are a practical solution for:

• Professional workshops replacing worn or failed front and rear anti roll links on a broad range of passenger, performance, 4WD and ute platforms at standard ride height, requiring a correctly specified fixed-length heavy duty ball joint replacement that installs directly without adjustment.
• Vehicle owners replacing worn or knocking anti roll links on a vehicle at standard ride height who require the correct fixed-length, platform-specific replacement link in the right ball joint orientation for their application.
• Anyone experiencing front or rear suspension knocking attributable to worn or failed anti roll link ends requiring a direct, durable and correctly dimensioned replacement that eliminates the noise and restores full anti roll effectiveness.

The right fixed anti roll link restores the direct, play-free connection between the anti roll and the suspension, eliminates link-related knock and rattle and returns the full roll resistance contribution of the anti roll through every corner.

Shop RD4-RD7 CR-V Fixed Anti roll Links

Explore the full RD4-RD7 CR-V fixed anti roll links range and find the right link for your vehicle. With front and rear platform-specific fixed-length heavy duty ball joint links for a broad range of Australian, Japanese, Korean, European and American passenger, performance, 4WD and ute platforms, all at the correct length and ball joint orientation for each application, you can replace every worn anti roll link accurately and complete every anti roll link service with confidence.