SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Jeep Grand Cherokee Coil spring spacers are the platform-specific kits used to introduce a controlled ride height increase at the front or rear coil spring seat position without replacing the coil spring itself. By adding a precisely dimensioned spacer or lift isolator between the spring end and the seat surface, the spring assembly is effective... Read more
Jeep Grand Cherokee Coil spring spacers are the platform-specific kits used to introduce a controlled ride height increase at the front or rear coil spring seat position without replacing the coil spring itself. By adding a precisely dimensioned spacer or lift isolator between the spring end and the seat surface, the spring assembly is effectively lengthened in its installed position, raising the suspension and increasing ground clearance and wheel arch gap at the applicable axle. Coil spring spacers are used across a wide range of applications: correcting factory nose-down rake on trucks and SUVs, leveling the front end after accessories such as winches and bumpers add front weight, completing a mild lift on 4WD and off-road platforms, and restoring ride height lost to spring sag on older vehicles.
The range covers front and rear spring pad isolators with small lift increments, front coil spring spacer and lift isolator kits in a range of lift heights for RWD and 4WD platforms, a front upper lift isolator for applicable 4WD platforms, front and rear leveling kits, rear lower spring pad spacer sets, and a spring pad bushing with a 1 inch lift for applicable platforms. Warranties range from limited lifetime to 3 years. Installation guides are available across most spacer kit products.
Factory suspension geometry on trucks, SUVs and body-on-frame 4WDs is typically tuned for a loaded condition, producing a nose-down rake at the front when operated unloaded. This reduces front clearance, limits tire fitment options, and places the vehicle's weight distribution forward of where it would sit with a level stance. On platforms that carry added front weight from accessories, the nose-down condition is further exaggerated. A coil spring spacer or leveling kit at the front corrects this by raising the front spring seat to bring the front ride height up to match the rear, restoring a level stance and the clearance needed for larger tires.
For 4WD and off-road builds, Jeep Grand Cherokee coil spring spacers provide a cost-effective first step toward increased ground clearance, raising the suspension at the coil spring seat without requiring new springs, strut replacements or geometry correction hardware. The correct spacer height must be matched to the platform and the intended lift to ensure the spacer does not overdrive the available suspension travel range at the applicable axle.
The Jeep Grand Cherokee coil spring spacer range includes:
A Jeep Grand Cherokee coil spring spacer or leveling kit is the most accessible and cost-effective method of raising ride height on applicable coil spring platforms, requiring no spring replacement, strut disassembly or geometry correction hardware for mild lift applications. The spacer installs at the spring seat and raises the spring assembly in its installed position, delivering the intended lift height without altering spring rate or shock absorber travel beyond the amount consumed by the spacer thickness.
For truck and SUV owners correcting factory rake, a Jeep Grand Cherokee leveling kit that raises the front to match the rear delivers an improved stance and increased tire clearance in a single low-cost installation. For 4WD owners completing a mild lift, coil spring spacers in the appropriate height for the platform deliver increased ground clearance at a significantly lower cost than a full spring replacement and with a shorter installation time.
Jeep Grand Cherokee Coil spring spacer kits are designed for installation at the front or rear coil spring seat position on applicable platforms. Installation times range from under an hour for simple pad and isolator kits to three hours for upper strut spacer installations requiring full strut disassembly. The correct spacer height must be matched to the platform and intended lift. Installation guides are available across most spacer kit products. For additional technical assistance, a dedicated support team is available to confirm correct product selection and lift height for the specific platform and suspension configuration.
Jeep Grand Cherokee Coil spring spacers are manufactured from high-strength polyurethane and quality materials engineered to withstand the sustained compressive load, road shock and environmental exposure that coil spring seat positions are subject to at the lifted ride height throughout the vehicle's service life. The spacer design maintains consistent height under sustained compression, ensuring the intended lift is retained across the full range of driving conditions. Warranties range from limited lifetime to 3 years depending on the product.
Jeep Grand Cherokee Coil spring spacers are a practical solution for:
The right coil spring spacer kit raises the suspension to the correct height at the applicable spring seat position, delivers improved stance and clearance for the intended application, and maintains that lift consistently under sustained load and driving conditions.
Explore the full Jeep Grand Cherokee coil spring spacers range and find the right kit for your vehicle. With front spring pad lift bushings, front coil spring spacer and isolator kits in a range of lift heights for RWD and 4WD platforms, front upper lift isolators for applicable 4WD platforms, front and rear leveling kits, rear lower spring pad spacer sets, a lift spring pad bushing and a universal dimensionally specified spring pad isolator, you can raise ride height correctly at every coil spring seat position and complete every lift and leveling installation with confidence.
1 Item
Qty Required 1 |
|---|
Kit Contents 1 Bushing |
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Universal Body mount bushing 2 in sq x 7/16 in x 1/4 in H
3 days ago from Croton-On-Hudson, US
US
Australia
United Kingdom
Europe