SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Honda Fit Axle bushings are the polyurethane bushing kits used to replace worn rubber bushings at the pivot and chassis mounting positions of beam axle and solid axle suspension systems. On rear beam axle platforms, the bushing at each chassis mounting point is the primary means by which the beam is located laterally and longitudinally relative ... Read more
Honda Fit Axle bushings are the polyurethane bushing kits used to replace worn rubber bushings at the pivot and chassis mounting positions of beam axle and solid axle suspension systems. On rear beam axle platforms, the bushing at each chassis mounting point is the primary means by which the beam is located laterally and longitudinally relative to the chassis, controlling rear axle position under braking, acceleration and cornering loads. On applicable platforms with solid rear axle suspension, the axle pivot bushing at the chassis mounting position controls the arc through which the axle moves under suspension travel, and its condition directly affects rear axle tracking, handling stability and NVH.
As axle bushings wear, increasing compliance at the chassis mounting interface allows the axle to shift under dynamic load, contributing to rear end wander, increased NVH, imprecise braking and handling inconsistency that progresses with continued use. The axle bushings range covers platform-specific rear beam axle bushing sets for applicable passenger platforms, axle pivot bushings in multiple profile variants for applicable RWD platforms, platform-specific axle pivot bushings, and universal pivot and link type bushing sets in dimensionally specified sizes for non-platform-specific axle bushing applications. All products are backed by a limited lifetime warranty.
Axle bushings on beam axle and solid rear axle platforms are among the highest-load bushing positions on the vehicle, operating under the combined lateral, longitudinal and vertical forces generated by every braking, acceleration and cornering input. Factory rubber axle bushings that have deteriorated beyond their designed compliance range allow measurable axle movement at the chassis mounting interface that directly degrades rear end handling stability, braking consistency and tire wear evenness.
On applicable rear beam axle passenger vehicles, worn beam bushings are a common cause of the rear end knocking, wandering and imprecise cornering behavior that is often attributed to other suspension faults before the bushings are correctly identified. On applicable RWD platforms, worn axle pivot bushings contribute to rear axle movement under power and braking that compounds with any other rear suspension wear present on the vehicle. Renewing Honda Fit axle bushings with correctly specified polyurethane alternatives restores correct axle location and compliance at every mounting position, immediately improving rear end stability, handling precision and NVH.
The Honda Fit axle bushing range includes:
Worn Honda Fit axle bushings are a frequently overlooked source of rear end instability and NVH that is often misattributed to wheel bearings, shocks or alignment before the bushings are correctly identified as the cause. Renewing them with correctly specified polyurethane alternatives restores correct axle location under dynamic load, eliminates the compliance that allows rear axle movement under power and braking, and delivers a noticeably more stable, precise and controlled rear end character from the moment of installation.
For workshops servicing applicable RWD and passenger platforms, axle bushing renewal is a straightforward and high-impact service that addresses a primary structural cause of rear end handling degradation at low parts cost and with a well-understood installation process. Universal pivot and link type bushing sets in dimensionally specified sizes provide the flexibility to address non-standard and custom axle pivot applications where no platform-specific kit is available.
Honda Fit Axle bushing kits are designed for installation at the front and rear axle pivot and chassis mounting positions on applicable platforms. Installation times range from under an hour for universal and single position kits to five hours for full beam axle bushing sets depending on the platform and number of bushing positions being renewed. Installation guides are available across most products. For additional technical assistance, a dedicated support team is available to confirm correct product selection, profile type and dimensional specification for the specific vehicle and axle mounting configuration.
Honda Fit Axle bushings are manufactured from high-strength polyurethane engineered to withstand the lateral, longitudinal and vertical loads, road shock and environmental exposure that axle pivot and beam mounting positions are subject to in everyday, performance and commercial use. Resistant to oil, heat and road contamination, polyurethane axle bushings maintain their compliance characteristics and axle location precision for longer than factory rubber alternatives, delivering more consistent rear suspension geometry and handling performance throughout their service life. All products are backed by a limited lifetime warranty.
Honda Fit Axle bushings are a practical solution for:
The right axle bushing kit restores correct axle location and compliance at every renewed mounting position, eliminates rear end movement and NVH, and delivers more stable, precise and confident rear suspension performance through every braking, acceleration and cornering input.
Explore the full Honda Fit axle bushings range and find the right kit for your vehicle. With rear axle beam bushing sets for applicable passenger platforms, standard and alternative profile axle pivot bushings for applicable RWD platforms, platform-specific axle pivot bushings, and universal pivot and link type bushing sets in dimensionally specified sizes, you can renew every axle mounting position accurately and complete every rear axle bushing service with confidence.
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Leaf Spring - Front Eye Bushing - 2.0 inch Main Eye ID
6 hours ago from Portland, US
US
Australia
United Kingdom
Europe