SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Leaf spring pads are the polyurethane pad and bushing kits used to replace worn or deteriorated isolator components at the spring-to-axle interface on rear leaf spring suspension platforms. At the center of every leaf spring assembly, the spring pack contacts the axle housing or axle perch saddle at a pad or bushing that isolates the spring from... Read more
Leaf spring pads are the polyurethane pad and bushing kits used to replace worn or deteriorated isolator components at the spring-to-axle interface on rear leaf spring suspension platforms. At the center of every leaf spring assembly, the spring pack contacts the axle housing or axle perch saddle at a pad or bushing that isolates the spring from direct metal contact with the axle surface and cushions the spring pack against the hard surface of the axle perch under load. Without a correctly functioning pad at this interface, the spring contacts the axle perch directly, transmitting road inputs and spring-under-load noise directly into the axle and chassis and accelerating wear at both the spring pack and the axle perch surface.
The leaf spring pads range covers spring-to-saddle bushing kits for the spring-to-axle perch saddle position and rear leaf spring pad kits in mono leaf and multi leaf configurations, covering the two most common rear leaf spring pack types found across applicable trucks, SUVs and 4WD platforms. All products are backed by a limited lifetime warranty.
The spring-to-axle interface pad on a leaf spring platform operates under the full compressive load of every road input, towing event and braking and acceleration cycle throughout the vehicle's service life. Factory pads and isolators at this position deteriorate through sustained compression, heat cycling and exposure to road contamination, thinning and hardening until they can no longer provide the correct cushioning and isolation between the spring and the axle perch. The result is increased harshness from the rear suspension, spring squeak and contact noise under load, and accelerated wear at the perch surface that compounds with continued use.
Renewing the spring-to-axle pad with a correctly specified polyurethane replacement restores the correct cushioning and isolation at the spring-to-perch interface, eliminating contact noise, reducing transmitted harshness and protecting the axle perch surface from the direct spring contact that a deteriorated or absent pad allows.
The leaf spring pad range includes:
Leaf spring pads are among the lowest-cost components in the rear leaf spring assembly yet they directly affect the harshness, noise and wear characteristics of the entire spring-to-axle interface. Renewing them at the point of deterioration restores correct spring-to-axle isolation immediately, eliminates contact noise and harshness, and protects the axle perch surface from accelerated wear without requiring any spring pack or axle service beyond access to the spring center bolt and U-bolt positions.
For shops completing rear spring U-bolt replacements, spring pack servicing or axle work on applicable platforms, including the correct spring pad as part of the service ensures the spring-to-axle interface is correctly supported and isolated from the moment the assembly is reassembled. Selecting the correct pad requires matching the spring pack configuration to the appropriate mono leaf or multi leaf variant.
Leaf spring pads are compatible with a wide range of vehicles, including:
Leaf spring pad kits install at the spring-to-axle perch interface position during spring pack or axle perch servicing. Rear leaf spring pads install with zero dedicated labor time as part of a spring or U-bolt service. The spring-to-saddle bushing kit installs in approximately one and a half hours. The correct product must be matched to the spring pack configuration of the specific vehicle, selecting the mono leaf or multi leaf variant as appropriate. For additional technical assistance, a dedicated support team is available to confirm correct product selection for the specific platform and spring pack configuration.
Leaf spring pads are manufactured from polyurethane and quality elastomeric materials engineered to withstand the sustained compressive load, heat cycling and environmental exposure that the spring-to-axle perch interface is subject to under towing, hauling and off-road conditions. Polyurethane maintains correct pad thickness and cushioning characteristics for longer than factory rubber and fibre pad alternatives, delivering more consistent spring-to-axle isolation and reduced contact noise throughout the service life of the installation. All products are backed by a limited lifetime warranty.
Leaf spring pads are a practical solution for:
The right leaf spring pad kit restores correct cushioning and isolation between the spring pack and the axle perch, eliminates spring contact noise and harshness, and protects the axle perch surface from the accelerated wear that direct spring contact produces.
Explore the full leaf spring pads range and find the right kit for your vehicle. With spring-to-saddle bushing kits, rear leaf spring pads for mono leaf and multi leaf spring configurations, and spring-to-saddle insulator bushings for multi leaf applications across applicable rear leaf spring platforms, you can restore correct spring-to-axle interface isolation and complete every leaf spring service with confidence.
1 Item
Qty Required 1 |
|---|
Kit Contents 4 Bushings |
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Universal Body mount bushing 2 in sq x 7/16 in x 1/4 in H
3 days ago from Croton-On-Hudson, US
US
Australia
United Kingdom
Europe