SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Ford Falcon Steering bushings are the platform-specific polyurethane bushing kits used to replace worn rubber bushings at the steering rack mount, idler arm and steering coupling positions. The steering rack and pinion is secured to the subframe, crossmember or chassis through a pair of mount bushings that isolate the rack from the chassis while... Read more
Ford Falcon Steering bushings are the platform-specific polyurethane bushing kits used to replace worn rubber bushings at the steering rack mount, idler arm and steering coupling positions. The steering rack and pinion is secured to the subframe, crossmember or chassis through a pair of mount bushings that isolate the rack from the chassis while maintaining its correct lateral and longitudinal position relative to the front suspension. The condition of these rack mount bushings directly determines how precisely the rack is located during steering inputs, how much rack movement is transmitted into the chassis as NVH, and whether the steering geometry at the tie rod ends remains consistent under load.
As rack mount bushings wear, the rack is able to shift within its mounts under steering load, introducing vague and inconsistent steering response, steering wheel shimmy and the progressive looseness that worn rack mount compliance introduces between driver input and wheel response. On applicable platforms, idler arm bushings at the idler arm pivot control the precision of steering box-equipped recirculating ball systems, and steering coupling bushings at the intermediate shaft coupling provide the compliant interface that isolates road-transmitted steering inputs from the steering column. The steering bushings range covers power and manual steering rack and pinion mount bushing kits in FWD, RWD and 4WD configurations, a bump steer correction rack mount bushing kit, dimensionally specified and platform-specific rack mount bushings, power steering arm bushings, steering idler bushings, and steering coupling bushings. All products are backed by a limited lifetime warranty.
Steering rack mount bushing wear is a frequently overlooked cause of the steering vagueness, shimmy and on-center imprecision that builds gradually on high-mileage vehicles. Because the rack mount bushings are not a commonly scheduled service item and their deterioration is gradual, the steering looseness they introduce is often normalized before the root cause is identified. On vehicles where the rack mounts through rubber bushings into a subframe or crossmember, a worn bushing at either mount position allows the rack to move laterally during steering inputs, introducing a small but measurable lag and looseness in the steering response that worsens as bushing compliance increases.
Renewing Ford Falcon rack mount bushings with correctly specified polyurethane alternatives restores correct rack location in its mounts, eliminating rack movement under steering load and returning a more precise, direct and connected steering response from the moment of installation. On applicable platforms with recirculating ball steering, idler arm bushing wear is a primary cause of steering wander and play, and renewing the idler pivot bushing is the most direct repair for the looseness that worn idler arm compliance introduces.
The Ford Falcon steering bushing range includes:
Steering rack mount bushing renewal addresses the most direct source of the rack-level looseness and imprecision that high-mileage steering systems develop, and it does so without requiring rack replacement or steering system overhaul. Renewing the mount bushings restores the correct, tightly located mounting that allows the rack to translate driver inputs to the tie rods without lateral movement at the rack body, immediately improving steering precision and on-center feel.
For workshops completing front suspension overhauls on applicable platforms, Ford Falcon steering rack mount bushing renewal as part of the service ensures the steering system is operating from a correctly located rack, eliminating the looseness that worn mount compliance introduces before other steering geometry work is carried out. Bump steer correction rack mount kits deliver an additional benefit on applicable performance platforms by addressing the bump steer that an incorrectly positioned rack introduces under suspension travel.
Ford Falcon Steering bushing kits are designed for installation at the steering rack chassis mount, idler arm pivot and intermediate shaft coupling positions on applicable platforms. Installation times range from under an hour for simple coupling and single-position bushing kits to three hours for full rack mount bushing kit installations. Installation guides are available across most products. For additional technical assistance, a dedicated support team is available to confirm correct product selection, drivetrain configuration and fitment for the specific platform and steering system design.
Ford Falcon Steering bushings are manufactured from high-strength polyurethane engineered to withstand the lateral and longitudinal steering loads, vibration and environmental exposure that steering rack mount, idler arm and coupling positions are subject to in everyday and performance driving. Polyurethane maintains correct rack location and mount compliance for longer than factory rubber alternatives under the repeated steering load cycling that rack mount positions experience, delivering more consistent steering precision and reduced rack movement throughout the service life of the installation. All products are backed by a limited lifetime warranty.
Ford Falcon Steering bushings are a practical solution for:
The right steering bushing kit restores correct rack location or idler pivot compliance at every renewed position, eliminates steering vagueness and shimmy from worn mount compliance, and delivers a more precise, direct and connected steering response from the first mile after installation.
Explore the full Ford Falcon steering bushings range and find the right kit for your vehicle. With power and manual steering rack and pinion mount bushing kits for FWD, RWD and 4WD configurations across applicable platforms, a bump steer correction rack mount kit, dimensionally specified rack mount bushings, power steering arm bushings, steering idler bushings and steering coupling bushings in multiple height specifications, you can restore correct steering system mounting compliance and complete every steering and suspension service with confidence.
Qty Required 1 |
|---|
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Steering Rack & Pinion Mount Bushing Kit - Power Steering Only
6 days ago from Greeleyville, US
US
Australia
United Kingdom
Europe