Subframe Bushing for 2006 Dodge Charger Daytona R/T

Dodge Charger Subframe bushings are the platform-specific polyurethane bushing kits used to replace worn rubber bushings at the front and rear subframe to chassis mounting positions. The subframe is the dedicated structural cradle that carries the suspension, steering and drivetrain components, and the bushings at its chassis mount positions control the stiffness, compliance and positional precision of the subframe relative to the body. On front subframe platforms, the bushing condition at each mount position directly affects steering precision, front suspension geometry consistency and the NVH transmitted from the front suspension and drivetrain into the cabin. On rear subframe platforms carrying the entire rear suspension assembly, the bushing condition determines rear wheel geometry consistency, handling balance, cornering stability and rear-end NVH.

As subframe bushings wear, compliance at the chassis mount interface increases, allowing the subframe to move under dynamic load and introducing geometry inconsistency, handling imprecision, increased NVH and a progressive deterioration in vehicle character that worsens with continued use. The subframe bushing range covers front subframe mount bushing kits including a manual transmission specific variant, a subframe align and lock kit, subframe to chassis front kits, full combined front and rear subframe mount bushing kits, rear subframe bushing kits and sets, rear subframe mount bushing sets, subframe mount bushing insert kits for front and rear positions, combined front and rear insert kits, rear subframe rear bushing inserts, rear sub-frame bushing sets for 4WD platforms, and additional subframe mount bushing variants. All products are backed by a limited lifetime warranty. Installation guides are available across most products.

Why Upgrade Dodge Charger Suspension?

Subframe bushings carry a continuous and significant structural load across all driving conditions and deteriorate through a combination of compression set, heat cycling and road contamination over the vehicle's service life. Because the subframe is a large, well-located assembly, the changes caused by bushing wear accumulate slowly and are easy to normalize before the full extent of the degradation becomes apparent. By the time front end handling feels vague or rear NVH has increased noticeably, subframe bushing compliance has often drifted well beyond its designed operating range.

Renewing Dodge Charger subframe bushings with correctly specified polyurethane alternatives restores correct subframe location and chassis compliance, delivering immediate and measurable improvements in front and rear suspension precision, cornering stability and NVH that reflect the full benefit of a freshly and correctly located subframe assembly. For performance vehicles where subframe positioning is critical to handling balance and traction, subframe bushing renewal is among the highest-impact bushing-level improvements available. Insert-style kits that install into the existing shell reduce installation complexity on applicable platforms while delivering the same compliance and location improvement as full shell replacement kits.

Dodge Charger Subframe Bushing Range

The Dodge Charger subframe bushing range includes:

• Dodge Charger Front Subframe Mount Bushing Kits: Platform-specific polyurethane bushing kits for the front subframe chassis mount positions on applicable FWD performance and AWD platforms, renewing all front subframe mount positions to restore correct subframe location and front suspension geometry precision.
• Dodge Charger Front Lower Subframe Bushing Sets, Manual Transmission: Front lower subframe bushing sets for the applicable manual transmission configuration of the front subframe mount on applicable performance platforms where the manual transmission variant uses a distinct bushing profile.
• Dodge Charger Subframe Align and Lock Kit Bushings: Specialized subframe bushing kits that align and lock the subframe to the chassis in a fixed, repeatable position on applicable performance platforms, eliminating subframe movement under dynamic load and delivering maximum positional consistency for performance and track applications.
• Dodge Charger Subframe to Chassis Front Kits: Full front subframe to chassis bushing kits for applicable performance and passenger platforms requiring complete front subframe mount renewal in a single purchase.
• Dodge Charger Subframe Mount Bushing Kits, Full: Complete front and rear subframe mount bushing kits covering all subframe chassis mount positions in a single purchase on applicable and Applicable performance and passenger platforms.
• Dodge Charger Subframe Front and Rear Mount Bushing Kits: Combined kits supplying both front and rear subframe mount bushings in a single purchase on applicable performance and passenger platforms.
• Dodge Charger Rear Subframe Bushing Kits and Sets: Platform-specific rear subframe bushing kits and sets for the rear subframe chassis mount positions on applicable performance, passenger and AWD platforms.
• Dodge Charger Rear Sub-Frame Bushing Sets, 4WD: Rear subframe bushing sets for applicable 4WD platforms where the rear subframe mount configuration requires a 4WD-specific bushing profile.
• Dodge Charger Rear Subframe Mount Bushing Sets: Rear subframe mount bushing sets for applicable performance and passenger platforms requiring rear subframe chassis mount renewal.
• Dodge Charger Subframe Mount Bushing Insert Kits: Polyurethane insert kits that install directly into the existing subframe mount shell without requiring shell removal, providing a more accessible renewal option on applicable performance and passenger platforms.
• Dodge Charger Front and Rear Mount Insert Combined Kits: Combined insert kits supplying polyurethane inserts for both front and rear subframe mount positions in a single purchase on applicable platforms.
• Dodge Charger Rear Subframe Rear Bushing Inserts: Polyurethane insert kits for the rear subframe rear mount positions on applicable performance platforms where only the rear-most subframe mount inserts require renewal.

Why Purchase Dodge Charger Subframe Bushings?

Allowing worn subframe bushings to remain in service means the suspension assembly is operating from a mounting platform that moves under load, progressively compromising wheel geometry, handling balance and NVH with every mile driven. Renewing them with correctly specified polyurethane alternatives restores correct subframe location, eliminates mounting compliance drift and delivers a suspension assembly that performs from a stable, correctly positioned base.

For workshops completing suspension overhauls and high-mileage servicing on performance and passenger vehicles, Dodge Charger subframe bushing renewal is a foundational step that addresses a structural-level cause of handling degradation before individual suspension component renewal is carried out. Insert kits offer a lower-labor renewal path on applicable platforms, delivering the compliance and location benefits of polyurethane without requiring full shell extraction. The subframe align and lock kit provides the highest level of subframe positional consistency for performance and track applications where subframe movement under dynamic load is a specific handling and geometry concern.

Installation and Support

Dodge Charger Subframe bushing kits are designed for installation at the front and rear subframe chassis mount positions on applicable platforms. Installation times range from one and a half hours for insert-style kits to four hours for full front and rear combined bushing kit installations. Insert kits install into the existing mount shell without requiring shell removal, reducing installation time on applicable platforms. Installation guides are available across most products. For additional technical assistance, a dedicated support team is available to confirm correct product selection, kit type and fitment for the specific vehicle, transmission configuration and subframe mount design.

Repair and Upgrade

Dodge Charger Subframe bushings are manufactured from high-strength polyurethane engineered to withstand the structural load, vibration, heat cycling and environmental exposure that front and rear subframe chassis mount positions are subject to in everyday, performance and off-road use. Subframe align and lock kits are engineered to eliminate subframe movement entirely at the chassis mount interface for the most demanding performance applications. Polyurethane insert kits deliver correct compliance and location improvements within the existing mount shell, reducing installation complexity while maintaining the durability benefits of polyurethane at the bushing interface. All products are backed by a limited lifetime warranty.

Who Dodge Charger Subframe Bushings Are For

Dodge Charger Subframe bushings are a practical solution for:

• Professional shops completing suspension overhauls and high-mileage servicing on applicable FWD, AWD and Applicable performance and passenger platforms requiring correct subframe mount bushing renewal to restore correct subframe location before individual suspension component work is carried out.
• Performance and enthusiast vehicle owners renewing front or rear subframe bushings to restore or improve handling balance, cornering precision and rear end stability on applicable platforms where subframe bushing compliance directly affects wheel geometry and traction.
• Track and competition drivers requiring subframe align and lock kit bushings on applicable performance platforms to eliminate subframe movement and deliver maximum positional consistency under the elevated dynamic loads of performance and track driving.
• Shops and DIY users requiring insert-style subframe bushing kits on applicable platforms where a lower-labor renewal path is preferred and the existing mount shell is in serviceable condition.

The right subframe bushing kit restores correct subframe location and chassis compliance, eliminates mounting movement and delivers more precise, stable and refined front and rear suspension performance from the moment of installation.

Shop Dodge Charger Subframe Bushings

Explore the full Dodge Charger subframe bushing range and find the right kit for your vehicle. With front subframe mount bushing kits, manual transmission specific variants, subframe align and lock kits, combined front and rear mount kits, rear subframe bushing kits and sets, 4WD specific rear subframe sets, subframe mount bushing insert kits, combined front and rear insert kits, and rear subframe rear bushing inserts across applicable FWD, AWD and applicable performance and passenger platforms, you can restore correct subframe location and complete every suspension overhaul with confidence.