Sway Bar Link Bushings for 1999 Mazda B2500 SX

Mazda B2500 Sway bar link bushings are the polyurethane bushing kits used to replace worn rubber bushings at the upper and lower pivot positions of the sway bar end link. On platforms that use a threaded stud or eyelet-style sway bar link assembly, the bushing at each end of the link provides the compliant pivot interface that allows the link to articulate as the sway bar moves through its torsional range. The condition of the link end bushings directly determines how precisely the sway bar force is transmitted to the suspension, and how much play develops between the link and the bar or the suspension mounting point under load.

As link bushings wear and compress, play develops at each pivot interface, allowing the link to knock and clunk over road inputs and reducing the sway bar's immediate response to cornering and body roll inputs. Worn link bushings are one of the most frequent sources of the front and rear suspension knocking that accumulates on everyday vehicles. The sway bar link bushings range covers platform-specific end link upper and full bushing kits, end link lower eyelet bushings in dimensionally specified standard sizes for applicable platforms, a sway bar link lower bushing kit, a combined end link and hardware set, a front sway bar link pin bush kit, a sway bar link assembly, a combined front and rear swaybar and link bushing set, a sway bar mount bracket and link bushing combined set, rear end link kits, body-style specific and 4WD specific variants, and universal link bushings in dimensionally specified standard and alternative dimensional sizes. Most products are backed by a limited lifetime warranty. Installation guides are available across most products.

Why Upgrade Mazda B2500 Suspension?

On platforms that use a threaded stud or eyelet sway bar end link, the link end bushings are the only compliant interfaces connecting the sway bar's torsional force to the suspension mounting point. As these bushings wear, the link pivot develops play that allows the link to move at both ends before transmitting any sway bar force, reducing the bar's immediate roll resistance and producing the characteristic knocking over bumps that is one of the most commonly diagnosed suspension noises in a workshop. Because the wear is progressive, the reduction in sway bar effectiveness builds gradually and is often not noticed until the link bushing is renewed and the improvement is immediately apparent.

Replacing worn Mazda B2500 link bushings with correctly specified polyurethane alternatives restores the correct interference fit at each pivot, eliminating link end play and returning the full and immediate sway bar force transmission that correct bushing condition delivers.

Mazda B2500 Sway Bar Link Bushing Range

The Mazda B2500 sway bar link bushing range includes:

• Mazda B2500 Sway Bar End Link Upper Bushing Sets: Polyurethane bushing sets for the upper pivot position of the front sway bar end link on applicable passenger and performance platforms.
• Mazda B2500 Sway Bar End Link Bushing Kits: Platform-specific polyurethane bushing kits renewing all end link pivot positions on applicable passenger and performance platforms.
• Mazda B2500 Sway Bar Link Lower Bushing Kits: Polyurethane bushing kits for the lower pivot position of the sway bar end link on applicable platforms, including a dimensionally specified OD variant for applicable platforms where the lower link bushing OD must be matched.
• Mazda B2500 Sway Bar End Link Lower Eyelet Bushings: Individual lower eyelet bushing kits in dimensional specifications for the lower eyelet position of the sway bar end link on applicable platforms.
• Mazda B2500 Sway Bar End Link Sets: Combined end link bushing sets supplying all bushing positions for the complete end link assembly on applicable platforms.
• Mazda B2500 Sway Bar Link Bushings: Individual sway bar link bushing kits for applicable platforms requiring targeted link bushing renewal at the applicable pivot position.
• Mazda B2500 Front Sway Bar End Link Bushing and Hardware Sets: Combined kits supplying both the front end link bushings and all required hardware for a complete front end link bushing service on applicable platforms.
• Mazda B2500 Front Sway Bar Link Pin Bush Kits: Polyurethane pin bush kits for the front sway bar link pin pivot position on applicable platforms where the link uses a pin-style pivot rather than a stud and eyelet.
• Mazda B2500 Sway Bar Link Assemblies: Complete sway bar link assembly replacements for applicable platforms requiring full link renewal alongside bushing replacement.
• Mazda B2500 Combined Front and Rear Swaybar and End Link Bushing Sets: Combined kits supplying both front and rear sway bar mount bushings and end link bushings in a single purchase on applicable platforms.
• Mazda B2500 Sway Bar Mount Bracket and Link Bushing Sets: Combined kits supplying mount bushings, bracket hardware and link bushings for a specific bar diameter in a single purchase.
• Mazda B2500 Rear End Link Kits: Rear sway bar end link bushing kits for applicable platforms requiring rear end link bushing renewal.
• Mazda B2500 Sway Bar End Link Bushing Sets, Body and 4WD Variants: End link bushing sets for applicable body and 4WD configurations where the link bushing profile differs from the standard passenger variant.
• Mazda B2500 Universal Sway Bar Link Bushings: Dimensionally specified universal link bushings in ID and length combinations and fractional OD, ID and nipple OD specifications for non-platform-specific end link applications.

Why Purchase Mazda B2500 Sway Bar Link Bushings?

Mazda B2500 Sway bar link bushing renewal is one of the most cost-effective and immediately noticeable suspension services available. The knock and rattle that worn link bushings produce is eliminated the moment correctly specified replacement bushings restore the correct interference at both pivot positions, and the improvement in sway bar responsiveness is apparent from the first corner. For workshops completing suspension services on everyday vehicles, end link bushing kits that address all pivot positions in a single purchase ensure the full link assembly is correctly restored without leaving worn bushings at any position.

Universal standard and alternative-dimensional dimensioned link bushings extend the range to non-platform-specific and aftermarket link applications, allowing the correct bushing to be matched by ID, OD and length for any end link pivot configuration where a platform-specific kit is not available.

Installation and Support

Mazda B2500 Sway bar link bushing kits are designed for installation at the front and rear sway bar end link upper and lower pivot positions. Installation time is approximately one hour per kit for most products. The correct bushing must be matched to the link pivot dimension and platform configuration. Installation guides are available across most products. For additional technical assistance, a dedicated support team is available to confirm correct product selection and dimensional specification for the specific platform and link pivot design.

Repair and Upgrade

Mazda B2500 Sway bar link bushings are manufactured from high-strength polyurethane engineered to withstand the angular deflection, torsional load and environmental exposure that sway bar end link pivot positions are subject to in everyday and demanding use. Polyurethane maintains its interference fit at the link pivot for longer than factory rubber alternatives under the continuous articulation that end link positions experience with every suspension input, delivering consistent sway bar force transmission and reduced link noise throughout the service life of the installation. Most products are backed by a limited lifetime warranty.

Who Mazda B2500 Sway Bar Link Bushings Are For

Mazda B2500 Sway bar link bushings are a practical solution for:

• Professional shops completing front and rear sway bar and suspension services on applicable passenger and performance platforms requiring correct end link bushing renewal to eliminate link knock, restore correct pivot compliance and return full sway bar effectiveness.
• Vehicle owners replacing worn sway bar end link bushings to eliminate the front or rear suspension knocking that worn link pivot compliance produces and restore immediate and precise sway bar force transmission.
• Shops and DIY users requiring universal standard or alternative-dimensional dimensioned link bushings for non-platform-specific end link pivot applications where the available dimensional specification matches the specific link configuration.

The right sway bar link bushing kit restores the correct interference fit at every link pivot position, eliminates end link knock and delivers full and immediate sway bar force transmission through every corner.

Shop Mazda B2500 Sway Bar Link Bushings

Explore the full Mazda B2500 sway bar link bushings range and find the right kit for your vehicle. With end link upper and full bushing kits, lower eyelet bushings in dimensional sizes, combined end link and hardware sets, link pin bush kits, link assemblies, combined front and rear swaybar and link bushing sets, rear end link kits, body and 4WD specific variants and universal dimensionally specified link bushings across applicable passenger and performance platforms, you can renew every sway bar link pivot position accurately and complete every sway bar link service with confidence.