Watts Link Bushing Kit with Fitting Position Rear for 2010 Chrysler PT Cruiser Classic

Nolathane Watts link bushings renew the pivots that keep a rear axle centered under your Chrysler PT Cruiser. A Watts link uses a center pivot on the axle and two lateral links to the body, and every one of those joints relies on a bushing. A Watts link bushing kit restores firm, quiet location at the center pivot and both link ends.

When these bushings wear, the rear axle starts to shift sideways in corners and over bumps, and the rear end loses its planted feel. Each listing shows the positions included and whether each kit fits your Chrysler PT Cruiser.

How a Watts Link Locates the Chrysler PT Cruiser Rear Axle

A solid rear axle needs something to stop it moving side to side. A Watts link does that with three main parts. A center pivot, sometimes called a bell crank or propeller, mounts to the rear axle housing and can rotate. Two lateral links run from each end of that pivot out to the body or chassis, one on each side.

As the axle moves up and down, the center pivot rotates and the two links swing in opposite directions. Their movements cancel out sideways, so the center of the axle stays very close to centered through its whole range of travel.

That?s why Watts link suspension is popular on performance and RWD vehicles. In Watts link rear suspension, the axle stays where it should during cornering, braking, and bumps, which keeps the rear end predictable.

Watts Link and Panhard Bar Compared

A panhard bar, also called a panhard rod or track bar, is the simpler way to locate an axle sideways. It?s a single bar running from one side of the axle to the opposite side of the body.

Because a panhard bar pivots at each end, it swings through an arc as the suspension moves. That arc pulls the axle slightly to one side as it rises and falls, so the rear end shifts sideways a little through its travel.

A Watts link keeps the axle much closer to centered, which gives more consistent handling, especially on uneven roads and through corners. The trade-offs are that a Watts link has more parts, more bushings to maintain, and needs more packaging space under the vehicle. A panhard bar is simpler and cheaper to build, which is why both designs are still widely used.

Chrysler PT Cruiser Watts Link Bushing Positions

A Watts link has bushings at the center pivot and at each end of the lateral links. Each listing shows the positions included.

Center Pivot Bushings

The center pivot mounts to the axle housing and rotates as the suspension moves. Its bushings let it turn freely while holding it firmly on the axle.

Link End Bushings

Each lateral link has a bushing at both ends, one where it meets the center pivot and one where it meets the body or chassis. These carry the sideways loads that keep the axle centered.

Signs of Worn Watts Link Bushings on Your Chrysler PT Cruiser

Worn Watts link bushings usually show up as noise and a loose rear end. Watch for:

• A clunk from the rear over bumps or when changing direction
• The rear end shifting sideways or feeling vague in corners
• Uneven wear on the rear tires
• Cracked or extruded bushings at the center pivot or link ends
• Visible sideways axle movement when someone rocks the body from side to side

That last check is useful. With your Chrysler PT Cruiser on its wheels, have someone push the body from side to side while you watch the axle and the link ends. Any movement at the bushings means they?re worn.

Rubber and Polyurethane Watts Link Bushings for the Chrysler PT Cruiser

Factory rubber Watts link bushings are soft for a quiet ride, but they give way under cornering load. That lets the axle shift before the Watts link can hold it, which undoes some of the linkage?s benefit.

Polyurethane Watts link bushings hold the axle more firmly in position sideways. They resist abrasion and stand up to oil, grease, ozone, and weathering, so they keep their shape for longer. The hardness, or durometer, is chosen for each position to balance firm location with vibration control.

The trade-off is a little more road feel, since polyurethane passes slightly more vibration than soft rubber.

Chrysler PT Cruiser Benefits for Cornering and Stability

With fresh polyurethane bushings, a Watts link keeps the rear axle more consistently centered. The rear end responds more sharply to direction changes, because there?s less give before the linkage takes up the load.

Behavior under braking and on uneven roads also becomes steadier, since the axle stays closer to where the Watts link is designed to hold it. These gains are about consistency rather than transforming how the vehicle drives, but on a car that?s done many miles, the difference is often easy to feel.

Choosing Watts Link Bushings for Your Chrysler PT Cruiser

Choosing the right kit depends on how much of the linkage needs attention. Each listing shows the options.

Complete Bushing Set or Individual Bushings

A complete set covers the center pivot and all link ends. Individual bushings suit a single worn position, though the others usually wear at a similar rate.

Listing Options and Vehicle Search

Use the vehicle search to find the kits that suit your Chrysler PT Cruiser, and check the listing for the positions included.

Link and Pivot Condition

Before rebushing, check the links for bends and the center pivot shaft for wear. Bent links or a worn pivot won?t be fixed by new bushings.

Fitting Watts Link Bushings on Your Chrysler PT Cruiser

Qualified fitting is recommended for Watts link bushings. The general process looks like this:

• Support the vehicle safely, with the axle at ride height
• Remove the links and center pivot as your Chrysler PT Cruiser?s design requires
• Press or fit the new bushings and sleeves
• Grease the bushings as specified
• Refit everything and tighten to specification at ride height
• Check the rear alignment where applicable

Check the torque again after the first few hundred miles.

Chrysler PT Cruiser Watts Link Bushing Limitations and Trade-Offs

Watts link bushings restore firm lateral location, but they have limits:

• Polyurethane transmits slightly more noise and vibration than rubber
• It can squeak if it isn?t greased
• New bushings can?t fix bent links, a worn pivot shaft or bearing, or worn trailing arm or control arm bushings
• A Watts link improves lateral location only, not ride height or roll stiffness

Compliance and Insurance

Make sure your Chrysler PT Cruiser meets the inspection requirements of the state where it?s registered, and let your insurance company know about any suspension modifications.

Warranty and Support

Nolathane Watts link bushings carry a lifetime warranty against manufacturing defects in material and workmanship, for the original vehicle. Our local support team can help you choose the right kit.

Shop Watts Link Bushings for Your Chrysler PT Cruiser

Watts link kits are a small but useful part of our polyurethane bushings selection.

Find Watts link bushings for your Chrysler PT Cruiser and order online with fast shipping. Every kit is covered by our fitment guarantee.