SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Dodge Dart Ball joint dust boots are the polyurethane and elastomeric boot kits used to replace torn, cracked or deteriorated rubber dust boots at the upper and lower ball joint positions on the front suspension. The dust boot is the protective seal fitted over the ball joint housing that keeps road contamination, moisture, grit and road salt aw... Read more
Dodge Dart Ball joint dust boots are the polyurethane and elastomeric boot kits used to replace torn, cracked or deteriorated rubber dust boots at the upper and lower ball joint positions on the front suspension. The dust boot is the protective seal fitted over the ball joint housing that keeps road contamination, moisture, grit and road salt away from the ball joint's bearing surface and grease fill. When a ball joint dust boot tears or collapses, the ball joint loses its contamination barrier and the bearing surface becomes exposed to the road environment that accelerates wear, reduces grease life and shortens the service life of the joint itself.
Renewing a torn ball joint dust boot with a correctly specified polyurethane or quality elastomeric replacement is the most cost-effective way to protect a serviceable ball joint from the accelerated wear that a damaged boot allows, and to restore the contamination barrier that the boot provides across the full articulation range of the joint. The ball joint range covers a front ball joint dust boot and bushing combined set, ball joint dust boot kits for 4WD platforms, platform-specific front and general dust boot kits across applicable passenger and 4WD platforms, and a standalone ball joint boot. Warranties range from limited lifetime to 3 years depending on the product.
Ball joint dust boot deterioration is one of the most frequently overlooked forms of front suspension wear, because a torn or damaged boot does not immediately produce handling symptoms that draw attention to the joint. The contamination entry that follows is gradual, introducing fine particles and moisture into the bearing surface over weeks and months of normal driving until the joint itself develops the looseness and handling imprecision that marks a worn ball joint. By the time the joint is identified as worn, the damage that could have been prevented by a boot replacement is already complete.
Replacing a torn dust boot while the ball joint remains serviceable protects the joint from the contamination damage that a damaged boot allows, extending the remaining service life of the joint and deferring or avoiding full ball joint replacement. For shops completing suspension inspections and control arm services on applicable platforms, Dodge Dart dust boot inspection and renewal is a low-cost, high-value step that directly protects the most expensive component in the ball joint assembly.
The Dodge Dart ball joint range includes:
Replacing a torn or cracked ball joint dust boot costs a fraction of the cost of replacing the ball joint itself, yet it directly determines whether the joint continues in service with a protected and lubricated bearing surface or deteriorates rapidly under the contamination that an unprotected joint accumulates. On platforms where the ball joint is press-fitted into the control arm, early boot renewal on a serviceable joint can defer a full control arm service by a significant margin.
For shops completing routine suspension inspections, control arm services and alignment corrections on applicable platforms, Dodge Dart boot inspection and renewal as part of the service ensures every joint leaves the shop with a correctly sealed contamination barrier. Platform-specific boot kits that match the exact boot profile and seat geometry of the applicable joint ensure the replacement seals correctly across the full articulation range rather than relying on a generic boot that may not seat correctly against the housing.
Dodge Dart Ball joint dust boot kits install at the upper and lower ball joint positions on applicable platforms. Installation times range from under an hour for simple boot-over-joint installations to two hours for the combined boot and bushing set. Correct fitment requires matching the boot profile and seat geometry to the specific joint design on the applicable platform. For additional technical assistance, a dedicated support team is available to confirm correct product selection and fitment for the specific vehicle and ball joint configuration.
Dodge Dart Ball joint dust boots are manufactured from polyurethane and quality elastomeric materials engineered to withstand the angular articulation, road contamination exposure and temperature cycling that ball joint positions are subject to throughout the suspension's service life. Quality replacement boots maintain correct sealing contact with the ball joint housing across the full articulation range of the joint, protecting the bearing surface from contamination entry at every steering and suspension travel angle.
Dodge Dart Ball joint dust boots are a practical solution for:
The right ball joint dust boot kit restores correct contamination protection at the ball joint bearing surface, seals the joint across its full articulation range, and extends the service life of a serviceable joint from the moment of installation.
Explore the Dodge Dart ball joint range and find the right boot kit for your vehicle. With a combined front dust boot and bushing set, ball joint dust boot kits for 4WD platforms, platform-specific front and general dust boot kits across applicable passenger, performance and 4WD platforms, and a standalone ball joint boot, you can restore correct contamination protection at every ball joint position and complete every front suspension service with confidence.
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Steering Rack & Pinion Mount Bushing Kit - Power Steering Only
1 week ago from Greeleyville, US
US
Australia
United Kingdom
Europe