SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Lexus LX470 Upper control arm kits are the geometry-correcting front upper control arm assemblies used to address the camber and caster error that a suspension lift introduces at the upper arm position on applicable 4WD and truck platforms. On double-wishbone front suspension systems, the upper control arm defines the upper end of the front whee... Read more
Lexus LX470 Upper control arm kits are the geometry-correcting front upper control arm assemblies used to address the camber and caster error that a suspension lift introduces at the upper arm position on applicable 4WD and truck platforms. On double-wishbone front suspension systems, the upper control arm defines the upper end of the front wheel's suspension travel arc. The factory upper arm is designed and positioned for the vehicle's standard ride height, and when that ride height is increased by a suspension lift, the changed geometry relationship between the upper arm inner pivot, the upper ball joint and the chassis introduces camber and caster errors that a standard alignment cannot correct because the arm hardware itself is positioned incorrectly for the new ride height.
The upper control arm kits range covers an HD adjustable front upper control arm set with a fully adjustable inner pivot for applicable 4WD platforms, and a fixed offset upper control arm kit with a predetermined lift correction geometry for applicable 4WD platforms. Both products address the same fundamental problem, restoring correct camber and caster geometry at the upper arm position following a suspension lift, through different correction approaches suited to their respective platforms and use cases. Warranties range from limited lifetime to 3 years. Installation guides are available for the HD adjustable set.
A suspension lift that is not accompanied by upper control arm geometry correction leaves the front suspension operating with camber and caster angles that are outside the specification the platform was designed to align to. The consequences accumulate progressively: tires wear on their inner or outer edges depending on the direction and magnitude of the camber error, the steering pull and instability that incorrect caster introduces becomes a consistent driving characteristic rather than an occasional occurrence, and the front upper ball joint is subjected to loading angles for which it was not designed, accelerating its wear rate under the incorrect geometry.
Correcting Lexus LX470 upper arm geometry restores the correct relationship between the upper arm pivot arc, the upper ball joint angle and the chassis geometry at the new ride height, bringing the front suspension back into a correctly alignable range and allowing the alignment to be set to the specification the platform was engineered to deliver. This is not an optional refinement after a lift; it is the structural correction that makes a correctly functioning aligned front suspension possible at the new ride height.
The Lexus LX470 upper control arm kit range includes:
Lexus LX470 Upper control arm geometry correction is the non-negotiable step that determines whether a lifted 4WD can be correctly aligned at the new ride height. Without it, the alignment cannot be set to specification because the correction required at the upper arm pivot position exceeds what standard alignment adjustment hardware can deliver. The arm geometry itself must be addressed before alignment work is meaningful.
The adjustable pivot set is the more versatile option, providing correction for any lift height within the adjustment range and allowing the exact geometry to be set and refined at the alignment rack. The fixed offset kit provides a simpler installation for the specific applicable lift height range on applicable platforms, delivering the correct predetermined correction without requiring pivot adjustment or alignment-stage geometry setting beyond standard alignment procedures.
Lexus LX470 Upper control arm kits install at the front upper arm chassis inner pivot and upper ball joint positions on applicable platforms. The HD adjustable set installs in approximately two hours, with the inner pivot set to the correct correction position during installation. The fixed offset kit installs in approximately three hours. Following installation of either product the vehicle must be presented for a wheel alignment to set camber and caster within specification using the correction delivered by the arm. An installation guide is available for the HD adjustable set.
For additional technical assistance, a dedicated support team is available to confirm correct product selection, applicable lift height range and fitment for the specific platform.
Lexus LX470 Upper control arm kits are manufactured from high-strength materials engineered to withstand the structural loads, road shock and environmental exposure that front upper control arm positions are subject to in everyday, towing and off-road use at lifted ride heights. HD specification arms are built to a heavier construction than factory upper arms, providing increased structural rigidity and load capacity for demanding 4WD and off-road applications. The adjustable inner pivot design delivers continuously adjustable geometry correction across the full lift height range, maintaining correct geometry under sustained suspension articulation without binding or interference at the pivot position.
Lexus LX470 Upper control arm kits are a practical solution for:
The right upper control arm kit restores the correct geometric relationship between the front upper arm pivot, the upper ball joint and the chassis at the new ride height, enables the suspension to be correctly aligned to specification, and eliminates the camber and caster errors that an uncorrected lift introduces from the first alignment after installation.
Explore the Lexus LX470 upper control arm kits range and find the right kit for your vehicle and lift height. With an HD adjustable front upper control arm set for applicable 4WD platforms and a fixed offset upper control arm kit for applicable 4WD platforms, you can restore correct upper arm geometry and complete every post-lift suspension correction with confidence.
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Steering Rack & Pinion Mount Bushing Kit - Power Steering Only
1 week ago from Greeleyville, US
US
Australia
United Kingdom
Europe