Coil Spring Spacers, Insulators & Seats with Fitting Position Front Axle, Rear Axle for MITSUBISHI PAJERO NM, NP

NM, NP PAJERO Coil spring spacers, insulators and seats are polyurethane pad and seat kits that sit at the upper or lower mounting position of the coil spring, isolating the spring from the chassis or axle housing and providing a precise interface between the spring end and its mounting face. They serve two distinct functions: replacing worn, cracked or collapsed factory spring pads to restore correct spring seating and reduce NVH, and providing a measured height increase at the spring interface to raise ride height without requiring spring replacement.

Over time, factory rubber coil spring pads and seats crack, compress and deteriorate, allowing the spring end to contact metal directly and transmitting increased vibration and noise into the chassis. NM, NP PAJERO Polyurethane replacements restore the correct isolation and seating interface, reducing NVH and protecting both the spring and its mounting seat from direct metal contact. For 4WDs, off-road vehicles and classic and performance cars where a modest ride height increase is desired, coil spring pad kits provide a straightforward and reversible height increase at either end of the spring without altering spring rate or requiring suspension disassembly beyond the spring itself. A practical maintenance and upgrade solution for workshops and experienced DIY users across a wide range of passenger, performance, 4WD and applications. Installation time is approximately one and a half hours across all products. Most products are backed by a lifetime warranty.

Why Upgrade NM, NP PAJERO Suspension?

Factory coil spring pads and seats are manufactured from rubber and deteriorate through heat cycling, ozone exposure and the compressive load they carry over the NM, NP PAJERO's service life. As they wear, they lose their ability to correctly isolate the spring from the chassis and to maintain even spring seating, leading to increased spring noise, metallic clunking and the transmission of road harshness that was previously absorbed at the spring interface.

Replacing worn spring pads and seats with quality polyurethane alternatives restores correct spring isolation and seating, reducing noise and harshness at the spring mounting position and protecting the spring and its housing from accelerated wear through direct metal contact. For NM, NP PAJERO requiring a mild ride height correction or increase, coil spring pad kits offer a straightforward and cost-effective approach that introduces height at the spring interface without affecting spring rate, suspension travel geometry or requiring replacement of the spring assembly itself.

NM, NP PAJERO Coil Spring Spacer, Insulator and Seat Range

The NM, NP PAJERO coil spring spacer, insulator and seat range includes:

• NM, NP PAJERO Upper Coil Spring Pad Kits: Polyurethane pads fitted at the top of the coil spring between the spring end and the upper spring seat on the chassis or strut tower, providing correct spring isolation at the upper mounting position.
• NM, NP PAJERO Lower Coil Spring Pad Kits: Polyurethane pads fitted at the bottom of the coil spring between the spring end and the lower spring seat on the axle housing or lower spring perch, providing correct spring isolation at the lower mounting position.
• NM, NP PAJERO Combined Coil Spring Pad Kits: Kits supplying both upper and lower coil spring pads for a complete spring interface restoration or ride height increase on applicable vehicle platforms.
• NM, NP PAJERO Standard Height Coil Spring Pad Kits: Direct replacement polyurethane pads at standard ride height for vehicles requiring spring pad renewal without altering ride height, restoring correct spring seating and NVH isolation.

Why Purchase NM, NP PAJERO Coil Spring Spacers, Insulators and Seats?

Allowing worn or collapsed coil spring pads and seats to remain in service allows the spring end to bear against its mounting surface without correct isolation, increasing noise, harshness and wear at the spring interface. Using quality polyurethane replacement pads restores correct spring seating and isolation, reduces NVH at the spring mounting position and protects both the spring and its housing from direct contact wear.

For workshops carrying out spring and suspension servicing, correct spring pad replacement ensures the suspension is returned to a fully correct standard, eliminating a common source of spring noise and interface wear that is often overlooked during routine repairs. For NM, NP PAJERO owners and experienced DIY users requiring a mild ride height increase, coil spring pad kits provide a practical, reversible and cost-effective solution that can be installed without specialist equipment in approximately one and a half hours per axle.

Installation and Support

NM, NP PAJERO Coil spring spacers, insulators and seats are designed for accurate installation at the upper or lower coil spring mounting position. Installation time is approximately one and a half hours per axle. Upper pads are installed to the top of the coil spring and lower pads to the bottom of the coil spring as indicated on applicable products. For additional technical assistance, a dedicated support team is available to help ensure correct product selection for the specific application and desired outcome.

Repair and Upgrade

NM, NP PAJERO Coil spring spacers, insulators and seats are manufactured from high-strength polyurethane engineered to withstand the compressive load, heat cycling and environmental exposure that coil spring mounting components are subject to in everyday and demanding use. Resistant to oil, heat and road contaminants, polyurethane spring pads maintain their isolation and height characteristics for longer than factory rubber alternatives and deliver more consistent spring seating throughout their service life. Most products are backed by a lifetime warranty.

Who NM, NP PAJERO Coil Spring Spacers, Insulators and Seats Are For

NM, NP PAJERO Coil spring spacers, insulators and seats are a practical solution for:

• Professional workshops carrying out spring and suspension servicing on a range of passenger, performance, 4WD and classic vehicle platforms requiring correct coil spring pad replacement as part of a thorough suspension repair.
• Experienced DIY users replacing worn or collapsed coil spring pads to restore correct spring seating, reduce NVH and eliminate spring noise at the upper or lower spring mounting position.
• 4WD owners and enthusiasts requiring a mild front or rear ride height increase through coil spring pad kits fitted at the spring interface, without requiring spring replacement or suspension disassembly beyond the spring itself.
• Classic and performance vehicle owners requiring coil spring pad kits to restore correct spring seating height or achieve a mild ride height adjustment as part of a suspension restoration or setup.

The right coil spring spacer, insulator or seat kit restores correct spring seating and isolation, eliminates spring noise and harshness and delivers a more precise, refined and correctly set suspension interface every time.

Shop NM, NP PAJERO Coil Spring Spacers, Insulators and Seats

Explore the full NM, NP PAJERO coil spring spacers, insulators and seats range and find the right kit for your vehicle. With upper and lower spring pad kits at standard height and a range of ride height increase options across classic Australian passenger vehicles, 4WDs, off-road platforms, performance vehicles and American trucks, you can restore correct spring seating, reduce NVH and achieve a mild ride height adjustment with confidence.