Suspension Bushes for HOLDEN MONARO
IMPROVE GRIP, HANDLING & PERFORMANCE.
Suspension bushes are one of the most fundamental components of any vehicle's suspension and steering system. Located at every pivot and mounting point throughout the suspension, they isolate the HOLDEN MONARO body from road inputs, maintain correct geometry and allow controlled movement across the full range of suspension travel. Over time... Read more
Suspension bushes are one of the most fundamental components of any vehicle's suspension and steering system. Located at every pivot and mounting point throughout the suspension, they isolate the HOLDEN MONARO body from road inputs, maintain correct geometry and allow controlled movement across the full range of suspension travel. Over time, wear and deterioration of rubber factory bushes leads to increased play, noise, vibration and handling inconsistencies, making timely replacement essential for restoring safe, precise and comfortable suspension performance.
High-strength polyurethane suspension bushes offer improved durability, resistance to oil, heat and road contaminants and greater consistency compared to factory rubber alternatives. Each Bush kit restores correct suspension geometry and compliance, reduces unwanted movement and delivers improved stability, handling and ride quality across everyday and demanding driving conditions. A reliable and long-lasting repair and upgrade solution for workshops and experienced DIY users for the HOLDEN MONARO.
Why Upgrade HOLDEN MONARO Suspension Bushes?
Factory rubber suspension bushes wear gradually with use, losing their original shape and compliance over time. As they deteriorate, they introduce play and looseness into the suspension system, causing vague handling, increased vehicle sway, uneven tyre wear and a general reduction in suspension precision and ride quality. In many cases, bush wear develops slowly enough that drivers may not notice the gradual decline until a significant amount of performance has already been lost.
Upgrading to high-strength HOLDEN MONARO polyurethane suspension bushes addresses this directly, restoring correct suspension geometry and compliance and delivering more precise, consistent handling performance. Polyurethane bushes resist the oil, heat and road contamination that accelerates rubber deterioration, and outlast factory alternatives under normal driving conditions. Backed by a lifetime warranty, they are a reliable, long-lasting upgrade for the HOLDEN MONARO experiencing the effects of worn suspension bushes, from everyday commuters to classic vehicles, performance builds and 4WDs.
HOLDEN MONARO Suspension Bush Range
The HOLDEN MONARO suspension bush range includes:
- HOLDEN MONARO Control Arm Bushes: Restore correct control arm pivot geometry at inner and outer mounting points, reducing play, improving handling precision and delivering consistent suspension performance across front and rear axle applications.
- HOLDEN MONARO Sway Bar Mount and Link Bushes: Restore correct sway bar location and link compliance, improving body control, reducing roll and delivering more confident, stable cornering performance.
- HOLDEN MONARO Leaf Spring Bushes: Restore correct spring eye and shackle fitment on leaf spring vehicles, reducing noise and delivering more controlled, consistent suspension movement.
- HOLDEN MONARO Strut Rod and Radius Arm Bushes: Restore correct longitudinal arm location and chassis pivot compliance, reducing understeer, improving handling consistency and returning more precise steering response.
- HOLDEN MONARO Trailing Arm Bushes: Restore correct rear arm geometry and pivot compliance, improving rear axle location and delivering more consistent, stable handling across all driving conditions.
- HOLDEN MONARO Panhard Rod Bushes: Restore correct lateral arm pivot compliance, improving axle location and handling consistency across a range of suspension heights and applications.
- HOLDEN MONARO Differential Mount Bushes: Restore correct differential positioning and reduce vibration and noise transmission into the vehicle body across a range of front and rear differential applications.
- HOLDEN MONARO Subframe and Crossmember Bushes: Restore correct subframe and crossmember location, reducing noise, vibration and unwanted movement and improving overall chassis rigidity and suspension precision.
- HOLDEN MONARO Coil Spring Pad Bushes: Restore correct spring pad fitment and compliance, reducing noise, vibration and spring movement across coil spring suspension applications.
- Essential Vehicle Kits: Comprehensive Bush kits that cover all key suspension and steering bush locations across a specific vehicle in a single purchase, restoring correct geometry and compliance throughout the entire suspension system.
Why Purchase HOLDEN MONARO Suspension Bushes?
Allowing suspension bushes to remain worn or deteriorated risks ongoing handling inconsistencies, increased tyre wear, elevated noise and vibration and accelerated wear on surrounding suspension components. Using quality polyurethane suspension bushes restores correct geometry and compliance across every suspension pivot and mounting point, returning the HOLDEN MONARO to a more precise, stable and refined standard from the moment of installation.
For workshops carrying out suspension maintenance and restoration, quality suspension bushes delivered as targeted individual kits or comprehensive HOLDEN MONARO kits ensure every bush location is addressed correctly and consistently. For HOLDEN MONARO owners and experienced DIY users, replacing worn bushes is one of the most cost-effective suspension upgrades available, delivering noticeable improvements to handling, ride quality and tyre wear with minimal investment. Investing in the right suspension bushes protects both the suspension system and the broader safety and performance of the HOLDEN MONARO.
Installation and Support
Suspension bushes are designed for accurate installation, with each kit including all necessary components for a complete, correct fitment for the HOLDEN MONARO. Installation times vary by application and location, typically ranging from 30 minutes to three hours. Detailed installation guides are available across most applications to support both professional workshops and experienced DIY users throughout the fitment process. For additional technical assistance, a dedicated support team is available to help ensure correct product selection, fitment and geometry outcomes.
Repair and Upgrade
Suspension bushes are manufactured from high-strength polyurethane engineered to withstand the load, vibration, oil exposure and environmental conditions that suspension pivot and mounting components are subject to in everyday and demanding use. Designed as both direct repair and performance upgrade solutions, each kit restores correct suspension geometry and compliance for the HOLDEN MONARO.
Polyurethane suspension bushes resist oil, heat and road contaminants, delivering longer service life and more consistent suspension performance than factory rubber alternatives. Backed by a lifetime warranty, they are the most reliable and long-lasting suspension bush solution available for the HOLDEN MONARO experiencing the effects of worn or deteriorated factory bushes.
Who HOLDEN MONARO Suspension Bushes Are For
HOLDEN MONARO Suspension bushes are a practical solution for:
- Professional workshops carrying out suspension maintenance, restoration and full vehicle bush replacements across a broad range of vehicle makes and models.
- Experienced DIY users replacing worn suspension bushes to restore correct geometry, reduce noise and vibration and improve handling precision and tyre wear.
- Performance and track enthusiasts upgrading factory rubber bushes with polyurethane alternatives to improve suspension precision, reduce compliance and sharpen handling response.
- Classic vehicle restorers requiring correct bush replacement across every suspension and steering location as part of a full restoration.
- Anyone experiencing increased noise, vibration, handling imprecision or uneven tyre wear as a result of worn or deteriorated factory suspension bushes.
The right suspension bushes restore correct geometry and compliance, reduce noise and vibration and deliver more precise, stable and confident suspension performance every time.
Shop HOLDEN MONARO Suspension Bushes
Explore the full HOLDEN MONARO suspension bushes range and find the right solution for your vehicle. With over 1,700 polyurethane Bush kits to suit a vast range of passenger, performance, 4WD and classic vehicle applications, including comprehensive essential vehicle kits covering every bush location in a single purchase, you can restore correct suspension geometry and compliance and complete every suspension repair or upgrade with confidence.
- Page Previous
- Page 2
- Page 3
- Page 4
- Page 5
- You're currently reading page 6
78 items
Front Crossmember - To Chassis Bushing Kit
✅ Fits HOLDEN MONAROSKU: 49009 Benefit Note:
This Nolathane kit replaces the bushings in the front cross member to dramatically reduce cross member flex.Front Crossmember - To Chassis Bushing Kit
✅ Fits HOLDEN MONAROReduces unwanted suspension movement, keeping tyres and components properly aligned; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 6 Bushings$149.00Front Gearbox Selector - Seat Bushing Kit
✅ Fits HOLDEN MONAROSKU: 49195 Benefit Note:
Nolathane's gearbox selector effectively reducing 'sloppy' gear changes.Front Gearbox Selector - Seat Bushing Kit
✅ Fits HOLDEN MONAROℹ️ Suits 6spd manual models, Suits manual modelsReduces unwanted suspension movement, keeping tyres and components properly aligned; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 1 Bushing$19.00Front Strut Rod - To Chassis Bushing Kit
✅ Fits HOLDEN MONAROSKU: 48166 Benefit Note:
A critical service item for any Commodore as the original fluid filled bushing fails prematurely causing shuddering under heavy braking and excess wheel movement. Nolathane offer a perfect solution that induces a responsive braking vehicle and includes caster adjustment for precise handling.Front Strut Rod - To Chassis Bushing Kit
✅ Fits HOLDEN MONAROℹ️ Performance Alignment - Adds -0.5deg to +1.25deg casterEngineered to be long-lasting and resistant to oil, heat, and road contaminants; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 2 Bushings, 2 Tubes, Hardware$207.00Front Strut Rod - To Chassis Bushing Kit
✅ Fits HOLDEN MONAROSKU: 48166E Benefit Note:
A critical service item for any Commodore as the original fluid filled bushing fails prematurely causing shuddering under heavy braking and excess wheel movement. Nolathane offer a perfect solution that induces a responsive braking vehicle.Front Strut Rod - To Chassis Bushing Kit
✅ Fits HOLDEN MONAROℹ️ Standard Alignment - Non adjustableImproves steering, corner precision, and driving experience; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 4 Bushings, 2 Plates, 2 Tubes, 4 Washers$170.01Front Strut Rod - To Control Arm Bushing Kit
✅ Fits HOLDEN MONAROSKU: 48019 Benefit Note:
Not many know but worn suspension bushings have an effect on braking performance. Strut rod bushings in particular tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Nolathane bushings that offer long lasting durability for a safer more predictable vehicle.Front Strut Rod - To Control Arm Bushing Kit
✅ Fits HOLDEN MONAROBoosts handling and traction, while creating a smoother ride; the best, replacement upgrade. Includes: 4 Bushings, 2 TubesIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 4 Bushings, 2 Tubes$53.00Front Strut Rod - To Control Arm Bushing Kit
✅ Fits HOLDEN MONAROSKU: 48019HD Benefit Note:
Not many know but worn suspension bushings have an effect on braking performance. Strut rod bushings in particular tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Nolathane bushings that offer long lasting durability for a safer more predictable vehicle.Front Strut Rod - To Control Arm Bushing Kit
✅ Fits HOLDEN MONAROℹ️ Heavy dutyDelivers a smoother ride while maintaining firmness for high-performance driving; the best, replacement upgrade. Includes: 4 Bushings, 2 TubesIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 4 Bushings, 2 Tubes$64.00Front Subframe - Bushing Kit
✅ Fits HOLDEN MONAROSKU: 49002 Benefit Note:
This Nolathane kit replaces the bushings in the front subframe to dramatically reduce front cross member misalignment and movement which allows a more positive feel from the front end during cornering.Front Subframe - Bushing Kit
✅ Fits HOLDEN MONAROImproves steering, corner precision, and driving experience; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 2Kit Contents 8 Bushings, 4 Tubes, 8 Washers$132.00Rear Coil Spring Pad - Lower Bushing Kit
✅ Fits HOLDEN MONAROSKU: 47307 Benefit Note:
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 models), looking to obtain that preferred ride height setting or improve steering response. Nolathane spring pads are an economical solution.Rear Coil Spring Pad - Lower Bushing Kit
✅ Fits HOLDEN MONAROℹ️ 10mm ride height increaseImproves steering, corner precision, and driving experience; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 2 Bushings$46.00Rear Coil Spring Pad - Upper Bushing Kit
✅ Fits HOLDEN MONAROSKU: 47295 Benefit Note:
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 models), looking to obtain that preferred ride height setting or improve steering response. Nolathane spring pads are an economical solution.Rear Coil Spring Pad - Upper Bushing Kit
✅ Fits HOLDEN MONAROℹ️ 8mm ride height increaseReduces unwanted suspension movement, keeping tyres and components properly aligned; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 2Kit Contents 1 Bushing$34.00Rear Control Arm - Outer Bushing Kit
✅ Fits HOLDEN MONAROSKU: 46023 Benefit Note:
Suffering uneven tyre wear, unbalanced braking or a less predictable vehicle while cornering. It could be your suspension bushings have failed. Replace these worn parts with Nolathane's superior formulation bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.Rear Control Arm - Outer Bushing Kit
✅ Fits HOLDEN MONAROℹ️ Standard AlignmentDelivers a smoother ride while maintaining firmness for high-performance driving; the best, replacement upgrade. Includes: 4 Bushings, 2 TubesIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 4 Bushings, 2 Tubes$78.00Rear Differential Mount - Bushing Kit
✅ Fits HOLDEN MONAROSKU: 49157 Benefit Note:
Not your typical remove and replace bushing kit but simple installation means great for the DIYer's. Nolathane's differential insert bushings work within the voids of the original factory bushing to ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.Rear Differential Mount - Bushing Kit
✅ Fits HOLDEN MONAROℹ️ InsertEngineered to be long-lasting and resistant to oil, heat, and road contaminants; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 1 Insert Bushing$51.00Rear Leaf Spring - Rear Eye and Shackle Bushing Kit
✅ Fits HOLDEN MONAROSKU: 47006 Benefit Note:
A critical service item for any leaf sprung vehicle. High kilometres and heavy load carrying causes excessive wear on rubber bushings. Nolathane's signature red bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.Rear Leaf Spring - Rear Eye and Shackle Bushing Kit
✅ Fits HOLDEN MONAROReduces unwanted suspension movement, keeping tyres and components properly aligned; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 8 Bushings$66.00Rear Subframe - Bushing Kit
✅ Fits HOLDEN MONAROSKU: 49145 Benefit Note:
This Nolathane kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for high performance applications.Rear Subframe - Bushing Kit
✅ Fits HOLDEN MONAROReduces unwanted suspension movement, keeping tyres and components properly aligned; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 4 Bushings$273.00Rear Subframe - Outer Bushing Kit
✅ Fits HOLDEN MONAROSKU: 49168 Benefit Note:
Not your typical remove and replace bushing kit but simple installation means great for the DIYer's. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear cross member. This Nolathane kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.Rear Subframe - Outer Bushing Kit
✅ Fits HOLDEN MONAROℹ️ Spacer - performance - Must use with 49145 - Induces NVHImproves chassis response by reducing flex and play in suspension components; the best, replacement upgrade. Includes:In StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 2 Bushings$38.01Rear Toe Arm - Bushing Kit
✅ Fits HOLDEN MONAROSKU: 46271 Benefit Note:
Suffering uneven tyre wear, unbalanced braking or a less predictable vehicle while cornering. It could be your suspension bushings have failed. Replace these worn parts with Nolathane's superior formulation bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.Rear Toe Arm - Bushing Kit
✅ Fits HOLDEN MONAROEnhances vehicle stability and reduces understeer or oversteer; the best, replacement upgrade. Includes: 2 Shell Bushings, 2 TubesIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 2 Shell Bushings, 2 Tubes$61.00
- Rear Sway Bar Mount - Bushing Kit 14mm to Suit Holden Commodore, Apollo, Nova, HSV and Toyota Camry, Celica and Corolla
- Rear Leaf Spring - To Saddle Insulator Bushing Kit to Suit Holden FE-HG
- Trailing Arm - Bushing Kit to Suit Holden H Series HQ-HZ
- Sway Bar Mount - Bushing Kit 22mm to Suit Holden Commodore VB-VS, EK-HJ and HSV
- Control Arm Lower - Inner Bushing Kit to Suit Holden/HSV Commodore VB-VZ
- Front and Rear Essential Vehicle Bushing Kit to Suit Holden HQ-WB Sedan and Wagon
- Shock Absorber - Bushing Kit to Suit Ford, Holden, Isuzu and Toyota
- Front Subframe - Bushing Kit to Suit Holden HQ-WB and Torana LH-LX
- Sway Bar Link - Upper Bushing Kit to Suit Holden Commodore VX-VZ and HSV and Toyota 4Runner, FJ Cruiser, Prado
- Rear Coil Spring Pad - Upper Bushing Kit to Suit Holden HQ-WB
- Front Sway Bar Mount - Bushing Kit 27mm to Suit Holden Commodore VB-VZ and HSV
- Coil Spring Pad +8mm Ride Height to Suit Ford Falcon/Fairlane, Mustang Classic, Holden HQ-WB and Torana
- Front Sway Bar Mount - Bushing Kit 27mm to Suit Holden HX-WB
- Rear Leaf Spring - Rear Eye and Shackle Bushing Kit to Suit Holden FJ-WB
- Essential Vehicle Kit to Suit Holden H Series HT, HG
- Sway Bar Mount - Bushing Kit 14mm to Suit Holden/HSV Commodore VB-VS, H Series EK-HZ
- Front Upper Control Arm - Bushing Kit to Suit Holden HT-WB and Torana LC-LX
- Subframe - Outer Bushing Kit to Suit Holden/HSV Commodore VP-VZ
- Shock Absorber - Bushing Kit to Suit Various Applications
- Rear Control Arm - Bushing Kit to Suit Holden Commodore VN-VZ and HSV
- Sway Bar Mount - Bushing Kit 20mm to Suit Holden/HSV Commodore VP-VZ
- Control Arm - Inner Bushing Service Kit to Suit Holden/HSV Commodore VP-VZ
- Rear Sway Bar Mount - Bushing Kit 16mm to Suit Holden Commodore, Apollo, Nova, HSV and Toyota Camry, Celica and Corolla
- Rear Leaf Spring - Front Eye Bushing Kit to Suit Holden HT, HG
- Essential Vehicle Kit to Suit Holden/HSV Commodore VT, VZ
- Front Sway Bar Mount - Bushing Kit 24mm to Suit Holden EK-HJ
- Front Lower Control Arm - Bushing Kit to Suit Holden HT, HG
- Rear Camber/Toe Kit to Suit Holden/HSV Commodore VX-VZ
- Shock Absorber - Bushing Kit to Suit Holden HQ-WB
- Front Crossmember - To Chassis Bushing Kit to Suit Holden HK, HT, HG
- Sway Bar Link - Bushing Kit to Suit Various Applications
- Rear Lower Coil Spring Pad +10mm Ride Height to Suit BMW 3 Series, M3, Z4 E36, E46, Holden Commodore VN-VZ and HSV
- Front Sway Bar Mount - Bushing Kit 28mm to Suit Holden Commodore VB-VZ and HSV
- Front Coil Spring Pad +10mm Ride Height to Suit Ford Falcon/Fairlane XK-XP, Mustang Classic and Holden HQ-WB
- Front Sway Bar Mount - Bushing Kit 24mm to Suit Holden Commodore VB-VZ and HSV
- Rear Leaf Spring - Slipper Pad Bushing Kit to Suit Holden FJ-WB, Rodeo TF
- Essential Vehicle Kit to Suit Holden H Series HQ-HZ
- Sway Bar Mount - Bushing Kit 16mm to Suit Holden Commodore VB-VS, FX-HJ and HSV
- Front Lower Control Arm - Bushing Kit to Suit Holden HT-WB and Torana LC-LX
- Front Gearbox Selector - Seat Bushing Kit to Suit Holden Commodore VT-VZ and HSV
- Shock Absorber - Bushing Kit to Suit Ford, Holden, Mazda and Toyota
- Front Strut Rod - To Chassis Bushing Kit Offset to Suit Holden Commodore VT-VZ and HSV
- Sway Bar Mount - Bushing Kit 16mm to Suit Holden/HSV Commodore VE-VF
- Control arm - inner bushing kit to Suit Holden/HSV Commodore VX-VZ
- Sway Bar Mount - Bushing Kit 18mm to Suit Holden Commodore VB-VS, EK-WB and HSV
- Rear Leaf Spring - To Saddle Insulator Bushing Kit to Suit Holden HK-WB
- Front Sway Bar Mount - Bushing Kit 27mm to Suit Holden EK-HJ
- Front Lower Control Arm - Bushing Kit to Suit Holden HQ-WB and Torana LC-LX
- Subframe - Traction Control Bushing Kit to Suit Holden/HSV Commodore VX-VZ
- Shock Absorber - Upper Bushing Kit to Suit Holden Commodore VB-VZ and HSV, Jaguar XJS
- Subframe - Bushing Kit to Suit Holden/HSV Commodore VX-VZ
- Universal Sway Bar Link - Washer Kit - Hardened cupped washers - OD=32mm, ID=10mm
- Front Strut Rod - To Control Arm Bushing Kit to Suit Holden Commodore VB-VZ and HSV
- Rear Sway Bar Link - Bushing Kit to Suit Holden Commodore VN-VX and HSV
- Rear Camber/Toe Kit - 2 Bolt Design to Suit Holden Commodore VN-VZ and HSV
- Front Sway Bar Mount - Bushing Kit 30mm to Suit Holden Commodore VB-VZ and HSV
- Coil Spring Pad - Upper Bushing Kit to Suit Holden H Series HQ-HZ
- Essential Vehicle Kit to Suit Holden H Series HQ-HZ
- Sway Bar Mount - Bushing Kit 20mm to Suit Holden Commodore VB-VS, EK-HJ and HSV
- Rear Trailing Arm - Bushing Kit to Suit Holden HQ-WB and Torana LC-LX
- Toe Arm - Bushing Kit to Suit Holden/HSV Commodore VX-VZ
- Coil Spring Pad - Upper Bushing 2mm ride height- to Suit Holden HQ-WB
- Coil Spring Pad - Upper Bushing Kit to Suit Holden/HSV Commodore VB-VZ
Refine your search
Can’t find what you’re looking for?
Tell us what you were trying to find so we can improve the site.
Give Feedback