SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Mitsubishi Eclipse Engine mount bushings are the platform-specific polyurethane bushing kits, insert kits and complete mount sets used to replace worn or deteriorated rubber components at the engine and transmission mount positions. Engine mounts support the weight of the engine and transmission assembly, locate the drivetrain within the engine ... Read more
Mitsubishi Eclipse Engine mount bushings are the platform-specific polyurethane bushing kits, insert kits and complete mount sets used to replace worn or deteriorated rubber components at the engine and transmission mount positions. Engine mounts support the weight of the engine and transmission assembly, locate the drivetrain within the engine bay, and isolate the chassis from the engine's vibration and torque reaction forces. The bushing or insert within each mount performs all three functions simultaneously: absorbing vertical engine load, resisting rotational torque reaction under acceleration and deceleration, and attenuating engine vibration at idle and throughout the rev range.
As engine mount bushings deteriorate through heat cycling, oil contamination, age and sustained torque loading, they collapse progressively, allowing increasing engine movement within the bay, transmitting more vibration into the chassis and eventually permitting the engine to shift enough under hard acceleration that drivetrain components, hoses and wiring experience stress and contact that accelerates wear. Insert style kits that install into the existing mount shell without shell removal are among the most cost-effective drivetrain mount renewals available, addressing the compliance deficit at the mount in under an hour on applicable platforms.
The range covers motor mount kits for applicable platforms, motor mount insert bushings for diesel applications, engine mount rear and front insert bushings, motor mounts for applicable performance engine applications, rear motor mount inserts, performance motor conversion sets, motor mount inserts in platform-specific and four-mount set configurations, complete engine and transmission mount sets, motor mount sets for applicable performance platforms, engine mount bushings for applicable commercial truck platforms, engine mounts for applicable classic engine applications, motor mount clamshell inserts, engine torque arm and torque strut insert bushings, applicable diesel engine mounting kits, motor and transmission mount combos for specific engine configurations, and engine mount insert sets. Warranties range from limited lifetime to 3 years. Installation guides are available across most products.
Engine mount bushing wear produces an immediately recognizable set of drivetrain symptoms: a pronounced thump as the drivetrain loads under acceleration, increased vibration at idle that transmits into the seat, floor and steering column, and a looseness in the engine's position within the bay that is visible on inspection. On platforms with high torque outputs including diesel, performance V8 and turbocharged applications, factory rubber engine mount bushings frequently deteriorate ahead of schedule because they face elevated torque reaction loads and the heat that high-output engines generate, both of which accelerate rubber degradation.
Renewing Mitsubishi Eclipse engine mount bushings with correctly specified polyurethane alternatives restores correct engine location and significantly reduces transmitted vibration, while the improved deformation resistance of polyurethane under repeated torque reaction loads delivers longer service life under the same operating conditions that caused the original failure.
The Mitsubishi Eclipse engine mount bushing range includes:
Mitsubishi Eclipse Engine mount bushing renewal is one of the most immediately noticeable drivetrain service items available. The thump under load, idle vibration and drivetrain looseness that worn mounts produce are eliminated from the first drive after correctly renewed mounts are installed. Insert style kits are the most cost-effective renewal path on applicable platforms, requiring minimal installation time and no special tooling while delivering the same compliance correction that a full mount replacement provides. For performance and high-torque applications where factory rubber mounts fail early, polyurethane inserts and complete mount sets deliver significantly extended service life under the same conditions that caused the original failure.
Mitsubishi Eclipse Engine mount bushing kits and insert kits install at the front, rear and upper rear engine mount positions and at the transmission, torque arm and torque strut mount positions on applicable platforms. Installation times range from under an hour for simple insert kits to two hours for complete mount sets requiring engine support and full mount removal. Insert style kits install into the existing mount shell without requiring full mount extraction on applicable platforms.
For additional technical assistance, a dedicated support team is available to confirm correct product selection, transmission configuration and fitment for the specific platform and engine mount design.
Mitsubishi Eclipse Engine mount bushings are manufactured from high-strength polyurethane engineered to withstand the sustained engine weight, torque reaction loads, heat cycling and oil contamination that engine and transmission mount positions are subject to across all driving conditions. Polyurethane resists deformation and heat degradation more effectively than factory rubber alternatives under the elevated torque and heat loads of performance, diesel and high-output engine applications, delivering longer service life and more consistent mount compliance. Clamshell insert designs allow renewal of the mount insert without full mount disassembly on applicable platforms. Performance motor conversion sets supply all mount hardware for correct engine location in applicable swap configurations.
Mitsubishi Eclipse Engine mount bushings are a practical solution for:
The right engine mount bushing kit restores correct engine location and mount compliance at every renewed position, eliminates drivetrain thump and transmitted vibration, and delivers a correctly supported and correctly isolated drivetrain from the first drive after installation.
Explore the full Mitsubishi Eclipse engine mount bushings range and find the right kit for your vehicle. With motor mount kits and insert kits for applicable platforms, diesel insert kits in turbo and non-turbo variants, performance engine motor mounts and performance conversion sets, applicable classic engine mounts, complete engine and transmission mount sets, engine torque arm and torque strut insert kits, applicable diesel engine mounting kits, applicable commercial engine mount bushings and motor mount clamshell insert kits across applicable and commercial platforms, you can restore correct engine mount compliance and complete every drivetrain service with confidence.
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
US
Australia
United Kingdom
Europe