Engine Mount Bushings

Engine mount bushings are the platform-specific polyurethane bushing kits, insert kits and complete mount sets used to replace worn or deteriorated rubber components at the engine and transmission mount positions. Engine mounts support the weight of the engine and transmission assembly, locate the drivetrain within the engine bay, and isolate the chassis from the engine's vibration and torque reaction forces. The bushing or insert within each mount performs all three functions simultaneously: absorbing vertical engine load, resisting rotational torque reaction under acceleration and deceleration, and attenuating engine vibration at idle and throughout the rev range.

As engine mount bushings deteriorate through heat cycling, oil contamination, age and sustained torque loading, they collapse progressively, allowing increasing engine movement within the bay, transmitting more vibration into the chassis and eventually permitting the engine to shift enough under hard acceleration that drivetrain components, hoses and wiring experience stress and contact that accelerates wear. Insert style kits that install into the existing mount shell without shell removal are among the most cost-effective drivetrain mount renewals available, addressing the compliance deficit at the mount in under an hour on applicable platforms.

The range covers motor mount kits for applicable platforms, motor mount insert bushings for diesel applications, engine mount rear and front insert bushings, motor mounts for applicable performance engine applications, rear motor mount inserts, performance motor conversion sets, motor mount inserts in platform-specific and four-mount set configurations, complete engine and transmission mount sets, motor mount sets for applicable performance platforms, engine mount bushings for applicable commercial truck platforms, engine mounts for applicable classic engine applications, motor mount clamshell inserts, engine torque arm and torque strut insert bushings, applicable diesel engine mounting kits, motor and transmission mount combos for specific engine configurations, and engine mount insert sets. Warranties range from limited lifetime to 3 years. Installation guides are available across most products.

Why Upgrade Suspension?

Engine mount bushing wear produces an immediately recognizable set of drivetrain symptoms: a pronounced thump as the drivetrain loads under acceleration, increased vibration at idle that transmits into the seat, floor and steering column, and a looseness in the engine's position within the bay that is visible on inspection. On platforms with high torque outputs including diesel, performance V8 and turbocharged applications, factory rubber engine mount bushings frequently deteriorate ahead of schedule because they face elevated torque reaction loads and the heat that high-output engines generate, both of which accelerate rubber degradation.

Renewing engine mount bushings with correctly specified polyurethane alternatives restores correct engine location and significantly reduces transmitted vibration, while the improved deformation resistance of polyurethane under repeated torque reaction loads delivers longer service life under the same operating conditions that caused the original failure.

Engine Mount Bushing Range

The engine mount bushing range includes:

• Motor Mount Kits, Applicable Platforms: Complete motor mount kits for applicable RWD and FWD platforms.
• Motor Mount Insert Bushings, Diesel Applications: Motor mount insert bushing kits for applicable diesel truck platforms in turbo and non-turbo diesel variants, engineered for the elevated torque and heat loads of diesel operation.
• Engine Mount Rear Insert Bushings: Polyurethane rear insert bushing kits for the rear engine mount position on applicable performance and passenger platforms, installing into the existing mount shell without requiring full mount removal.
• Front Motor Mount Inserts: Polyurethane insert kits for the front motor mount position on applicable passenger and performance platforms.
• Motor Mounts, Performance Engine Applications: Complete motor mount kits for applicable performance engine applications on applicable RWD platforms.
• Rear Motor Mount Inserts: Polyurethane rear motor mount insert kits for applicable passenger and performance platforms.
• Performance Motor Conversion Sets: Complete motor mount conversion sets supplying the mount hardware and bushings required to correctly locate an applicable performance engine in applicable donor chassis configurations.
• Motor Mount Inserts, Platform-Specific: Polyurethane insert kits for the motor mount positions on applicable passenger, performance and 4WD platforms, installing into the existing mount shell on applicable platforms.
• Motor Mount Inserts, Four-Mount Sets: Complete four-mount insert sets for applicable FWD platforms where all four motor mount insert positions are renewed in a single purchase.
• Motor Mount Inserts, Manual Transmission Specific: Motor mount insert kits for applicable platforms where the manual transmission variant uses a distinct mount insert profile from the automatic equivalent.
• Motor Mount Insert Kits, Additional Platforms: Motor mount insert kits for additional applicable passenger and performance platforms.
• Complete Engine and Transmission Mount Sets: Combined sets supplying all engine and transmission mount components across all positions in a single purchase for applicable V8, applicable and Applicable platforms.
• Motor Mount Sets, Performance Platforms: Complete motor mount sets for applicable passenger and performance platforms.
• Engine Mount Bushings, Commercial: Engine mount bushing kits for applicable commercial semi truck platforms.
• Engine Mount Bushings, Platform-Specific: Platform-specific engine mount bushing kits for applicable and Applicable passenger and performance platforms.
• Engine Mount, Classic Application: Complete engine mount kits for applicable classic engine applications on applicable classic platforms.
• Motor Mount Clamshell Inserts, Diesel Platforms: Clamshell style motor mount insert kits for applicable diesel platforms where the clamshell insert design is required at the applicable mount position.
• Engine Torque Arm Insert Bushings: Polyurethane insert bushing kits for the engine torque arm mount position on applicable RWD performance platforms, controlling longitudinal torque reaction under acceleration and deceleration.
• Engine Torque Strut Bushings: Polyurethane bushing kits for the engine torque strut mount position on applicable FWD and AWD platforms.
• Engine Mount Upper Rear Insert Bushings: Polyurethane insert bushing kits for the upper rear engine mount position on applicable performance platforms.
• Engine Mounting, Diesel Motors: Engine mounting kits for applicable diesel motor configurations, engineered for the specific mount geometry and torque loads of the applicable diesel installation.
• Motor and Transmission Mount Combos and Sets: Combined motor and transmission mount kits for applicable platforms where both engine and transmission mount renewal is required for a specific engine displacement or configuration variant.

Why Purchase Engine Mount Bushings?

Engine mount bushing renewal is one of the most immediately noticeable drivetrain service items available. The thump under load, idle vibration and drivetrain looseness that worn mounts produce are eliminated from the first drive after correctly renewed mounts are installed. Insert style kits are the most cost-effective renewal path on applicable platforms, requiring minimal installation time and no special tooling while delivering the same compliance correction that a full mount replacement provides. For performance and high-torque applications where factory rubber mounts fail early, polyurethane inserts and complete mount sets deliver significantly extended service life under the same conditions that caused the original failure.

Compatible Vehicles

Engine mount bushings are compatible with a wide range of vehicles, including:

• Applicable RWD and FWD passenger and performance vehicles requiring motor mount kit or insert renewal.
• Applicable diesel trucks requiring motor mount insert bushing renewal in the turbo or non-turbo diesel variant of the applicable mount specification.
• Applicable RWD performance and passenger vehicles requiring motor mount insert kits, complete mount sets or specific displacement variant mount sets.
• Applicable RWD performance vehicles requiring performance engine motor mount kits or performance motor conversion sets for applicable engine installations in applicable chassis configurations.
• Classic applicable vehicles requiring applicable classic engine mount kits.
• Applicable RWD performance vehicles requiring engine torque arm insert bushing renewal.
• FWD and AWD passenger and performance vehicles requiring engine torque strut bushing renewal and four-mount insert set installations.
• Applicable passenger and performance vehicles requiring motor mount insert kits, complete engine and transmission mount sets or motor and transmission mount combos.
• Applicable diesel vehicles requiring engine mounting kits engineered for the applicable diesel motor mount geometry and torque loads.
• Applicable commercial semi trucks requiring engine mount bushing renewal.

Installation and Support

Engine mount bushing kits and insert kits install at the front, rear and upper rear engine mount positions and at the transmission, torque arm and torque strut mount positions on applicable platforms. Installation times range from under an hour for simple insert kits to two hours for complete mount sets requiring engine support and full mount removal. Insert style kits install into the existing mount shell without requiring full mount extraction on applicable platforms.

For additional technical assistance, a dedicated support team is available to confirm correct product selection, transmission configuration and fitment for the specific platform and engine mount design.

Repair and Upgrade

Engine mount bushings are manufactured from high-strength polyurethane engineered to withstand the sustained engine weight, torque reaction loads, heat cycling and oil contamination that engine and transmission mount positions are subject to across all driving conditions. Polyurethane resists deformation and heat degradation more effectively than factory rubber alternatives under the elevated torque and heat loads of performance, diesel and high-output engine applications, delivering longer service life and more consistent mount compliance. Clamshell insert designs allow renewal of the mount insert without full mount disassembly on applicable platforms. Performance motor conversion sets supply all mount hardware for correct engine location in applicable swap configurations.

Who Engine Mount Bushings Are For

Engine mount bushings are a practical solution for:

• Professional shops completing engine services, drivetrain overhauls and performance builds on applicable passenger and performance platforms requiring engine and transmission mount bushing renewal to eliminate drivetrain thump, reduce transmitted vibration and correctly locate the engine within the bay.
• Performance and high-torque vehicle owners renewing engine mount bushings with polyurethane insert kits or complete mount sets on applicable V8, diesel and turbocharged platforms where factory rubber mount life is limited by elevated torque and heat loads.
• Performance engine swap builders requiring correctly specified motor mount conversion sets to locate the applicable performance engine correctly within applicable donor chassis configurations.
• Diesel truck owners requiring motor mount insert bushing renewal in the applicable turbo or non-turbo diesel variant to eliminate drivetrain thump and restore correct engine location under sustained diesel torque loads.
• Applicable diesel vehicle owners requiring engine mounting kit renewal engineered for the applicable diesel motor mount geometry and torque application.

The right engine mount bushing kit restores correct engine location and mount compliance at every renewed position, eliminates drivetrain thump and transmitted vibration, and delivers a correctly supported and correctly isolated drivetrain from the first drive after installation.

Shop Engine Mount Bushings

Explore the full engine mount bushings range and find the right kit for your vehicle. With motor mount kits and insert kits for applicable platforms, diesel insert kits in turbo and non-turbo variants, performance engine motor mounts and performance conversion sets, applicable classic engine mounts, complete engine and transmission mount sets, engine torque arm and torque strut insert kits, applicable diesel engine mounting kits, applicable commercial engine mount bushings and motor mount clamshell insert kits across applicable and commercial platforms, you can restore correct engine mount compliance and complete every drivetrain service with confidence.