Track Order
|
Bushing Size Search
|
Find a Store
|
Trade Site
|
Help
|
Toggle Nav
Cart
Parts for GMC SIERRA 1500 5th Gen GMT T1XX 4WD

Suspension Diagrams

Front Suspension

Front Suspension

Front Suspension

Front Suspension

Rear Suspension

Rear Suspension

Set Descending Direction

2 Items

  1. Front Control Arm Upper - Arm Assembly

    Front Control Arm Upper - Arm Assembly
    ✅ Fits GMC SIERRA 1500 5th Gen GMT T1XX 4WD

    Front Control Arm Upper - Arm Assembly
    Pre-Order
    Available for Preorder. Stock due on 3/10/2026.
    Available for Preorder. Stock due on 3/10/2026.
    SKU: 459141 Benefit Note: A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Nolathane offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.

    Front Control Arm Upper - Arm Assembly
    ✅ Fits GMC SIERRA 1500 5th Gen GMT T1XX 4WD

    ℹ️ Fixed offset alignment correction arms - Includes ball joint
    Engineered to handle extreme forces while maintaining safety and reliability; the best, replacement upgrade. Includes: 2 Arms
    Pre-Order
    Available for Preorder. Stock due on 3/10/2026.
    Available for Preorder. Stock due on 3/10/2026.
    Qty Required 1
    Kit Contents 2 Arms
    $834.00
  2. Nolathane Bushing and Bearing Press Tool Kit

    Nolathane Bushing and Bearing Press Tool Kit
    ✅ Fits GMC SIERRA 1500 5th Gen GMT T1XX 4WD

    Nolathane Bushing and Bearing Press Tool Kit
    In Stock
    Ships within 24hrs.
    Ships within 24hrs.
    SKU: NTK001 Kit Contains:
    • 18 x sleeves - 28mm-113mm diameter (5mm increments)
    • 4 x press plates
    • 4 x pulling spindles covering bolt sizes (M10, M12, M14, M16)
      • Rolled thread on spindles
      • Nuts with double washers and encapsulated lubricated ball bearings for strength and longevity (stops nut from binding and stripping thread)
    Ideal for bushings, bearings, spherical joints or other applications. Can be used on workshop press or better yet on car simply and easily. Less force required to remove / install bushings, bearings and joints making use easy even without power tools Benefit Note: Most old and new suspension bushings are pressed in and out with old bearing shells, sockets or just anything you can find. This creates a safety issue, given that heat treated steel will shatter under stress. The assortment of sleeves that make up the Nolathane Press Tool Kit are made from mild steel to allow distortion or crush when over-pressed. These newly designed tools provide an easy way to install and remove Nolathane polyurethane bushings and aid in other workshop pressing requirements.

    Nolathane Bushing and Bearing Press Tool Kit
    ✅ Fits GMC SIERRA 1500 5th Gen GMT T1XX 4WD

    ℹ️ 26 Piece press in/out tool kit
    Enables safe and efficient bushing removal and installation; ideal for workshop or field use. Includes: 18 sleeves (113mm in 5mm steps), 4 press plates & 4 pulling spindles (M10, M12, M14, M16).
    In Stock
    Ships within 24hrs.
    Ships within 24hrs.
    Qty Required 1
    Kit Contents 18 Tubes, 4 Stepped Plates, 4 Threaded Rods, 4 Spare Bearings, 8 Spare Bearing Plates
    $688.00
View as Grid view List / Trade View
Set Descending Direction

Refine your search

View as Grid view List / Trade View
Set Descending Direction

Category

Fitting Position

Clear all
Done
Close