Subframe Bushes with Fitting Position Front Axle, Rear Axle for HDT COMMODORE VH Retro

Nolathane subframe bushes replace the worn mounts between the VH Retro COMMODORE subframe and its body. Most modern cars, SUVs and many utes don?t bolt their suspension directly to the body. Instead, the suspension arms, steering rack, engine or differential are mounted to a separate subframe, also called a cradle, which is then attached to the body through large rubber bushes.

Those subframe bushes decide how much the entire suspension assembly can move. When they wear, the whole subframe can shift under braking, acceleration and cornering, taking every suspension pivot with it. Polyurethane subframe bushes lock the subframe into position for sharper steering, better traction and more consistent wheel alignment.

VH Retro COMMODORE Front and Rear Subframes

Front Subframes

A front subframe, often called an engine cradle or front crossmember, typically carries the lower control arms, the steering rack and, on many front-wheel-drive and all-wheel-drive vehicles, the engine and transmission mounts. Movement here affects steering precision, braking stability and how the vehicle responds to throttle.

Rear Subframes

A rear subframe, or rear cradle, is common on vehicles with independent rear suspension (IRS). It carries the rear control arms and, on rear-wheel-drive and all-wheel-drive vehicles, the differential. Rear subframe bushes have to resist braking, cornering and drive torque, which is why rear subframe bushes often wear quickly on powerful or heavily loaded vehicles.

Why Subframe Bushes Matter

Subframe bushes are designed to isolate road noise and vibration from the cabin, so factory versions are usually large and soft. That softness allows the subframe to move a small amount relative to the body. Every suspension arm on the subframe moves with it, so even new arm bushes can?t hold an alignment if the subframe itself is shifting.

On rear subframes that carry the differential, a soft subframe also lets drive torque twist the whole assembly. That?s a common cause of wheel hop, axle tramp and a clunk when taking up drive. Firmer subframe bushes keep the rear suspension geometry stable under power, which improves traction and makes the rear end more predictable.

Why Subframe Bushes Wear Out

• Constant loading from the weight of the engine, suspension and differential
• Drive torque twisting the rear subframe under acceleration
• Braking and cornering loads transferred through the suspension
• Heat from the exhaust, engine and transmission
• Oil, coolant and fuel leaks softening rubber
• Age, ozone and road salt cracking and corroding the mounts

Many factory subframe bushes have voids or cut-outs in the rubber to make them softer. Over time, those voids allow more and more movement as the rubber fatigues.

Signs of Worn VH Retro COMMODORE Subframe Bushes

• A clunk from the front or rear when taking off, braking or shifting between drive and reverse
• Wheel hop or rear-end shuffle under hard acceleration
• Steering that feels vague or slow to respond despite good arm bushes
• The rear of the vehicle steering itself mid-corner, especially under power
• Increased vibration and road noise through the floor
• An alignment that won?t hold, or varies between visits
• Cracked, split or separated rubber visible at the subframe mounting points

Because these symptoms overlap with worn control arm bushes, diff bushes and engine mounts, it?s worth inspecting the subframe mounts whenever chasing a stubborn clunk or handling problem.

Polyurethane Subframe Bushes

Polyurethane subframe bushes hold the subframe firmly to the body while still isolating some vibration. Nolathane has been making polyurethane suspension bushings since 1974, originally developed to replace brass bushes in hillclimb competition. The signature red bushings are made in a range of durometers (hardness grades) for each position, and offer outstanding abrasion resistance, high load-bearing capability, increased tensile strength and resistance to oil, grease, ozone and weathering.

Some subframe bush designs replace the factory bush entirely, while others fill the voids in the original bush to reduce movement without removing it. Each listing shows the type of kit and the position it suits.

Trade-Offs to Consider

Firmer subframe bushes give the biggest improvement in precision and traction, but they also transmit more of what the suspension and drivetrain are doing into the cabin. Expect slightly more road noise, tyre noise and drivetrain vibration than with soft factory rubber. For most daily drivers, the change is modest, and many owners find the sharper response well worth it. For vehicles where cabin refinement is the top priority, weigh that trade-off before ordering.

Choosing Subframe Bushes for Your VH Retro COMMODORE

Before ordering, confirm:

• Front or rear subframe
• The mounting position, as some subframes use different bushes front and rear
• The exact vehicle variant, as drivetrain, body style and model year can change the bush
• Whether you want a full replacement bush or an insert-style kit

Replacing all bushes on one subframe at the same time gives the most consistent result. Our fitment guarantee means the kit you order for your VH Retro COMMODORE is confirmed to suit it.

Replacing Subframe Bushes on Your VH Retro COMMODORE

Subframe bush replacement suits professional workshops and experienced home mechanics. It often means lowering the subframe partly or completely, so it?s a larger job than most bush replacements. As a general guide:

1. Support the vehicle securely on stands and support the subframe with a suitable jack or cradle.
2. Support the engine or differential if it?s mounted to the subframe.
3. Disconnect brake lines, ABS sensors, exhaust, steering or drive shafts as needed.
4. Mark the subframe?s position, then loosen and remove the mounting bolts and lower it only as far as needed.
5. Remove the old bushes, which may need a press or dedicated tool, and clean the mounting points.
6. Fit the new bushes with a grease suitable for polyurethane, such as a silicone or PTFE-based grease, where specified.
7. Raise the subframe into its marked position and tighten all bolts to the vehicle manufacturer?s specification.
8. Reconnect everything removed, bleed the brakes if any lines were opened, and have a wheel alignment (tracking) carried out.

Some subframe bolts are designed to be used once only, so check the manufacturer?s information and replace them where required.

Lifetime Warranty

Nolathane subframe bushes are backed by a lifetime warranty against manufacturing defects in material and workmanship, for the original vehicle they?re fitted to.

Shop Subframe Bushes for Your VH Retro COMMODORE

Find the subframe bushes for your VH Retro COMMODORE, then order online with fast shipping or have them fitted by a Nolathane reseller. 60-day returns give you time if a part isn?t right, and our local support team can help whether you?re curing wheel hop, tracking down a stubborn clunk or upgrading for improved handling and performance.