Subframe Bushes with Fitting Position Front Axle for HONDA ACCORD CL, CM

CL, CM ACCORD Subframe bushes are the polyurethane bush kits used to replace worn rubber bushes at the front and rear subframe to chassis mounting positions. The subframe is the dedicated structural cradle that supports the suspension, steering and drivetrain components, and the bushes at its chassis mounting points control the stiffness, isolation and precision of the subframe's positional relationship to the body. On rear independent suspension platforms, the rear subframe carries the entire rear suspension assembly, and the compliance and condition of its mounting bushes directly affects rear wheel geometry consistency, handling balance, cornering stability and the NVH transmitted from the rear suspension into the cabin.

As subframe bushes wear, they allow increasing movement and compliance at the chassis mounting interface, introducing rear axle geometry inconsistency, handling imprecision, increased NVH and a gradual deterioration in rear end stability that worsens progressively. Quality CL, CM ACCORD polyurethane replacement subframe bush kits restore correct subframe location and compliance, reducing unwanted movement and delivering more precise, stable and refined rear suspension performance. Available as standard replacement full bush kits, polyurethane insert kits that install into the original bush shell, and performance outer spacer variants for applicable platforms. Installation guides are available across most products. Most products are backed by a lifetime warranty.

Why Upgrade CL, CM ACCORD Suspension?

Subframe bushes carry a significant and continuous structural load across all driving conditions, and deteriorate through a combination of compression set, heat cycling and road contamination over the CL, CM ACCORD's service life. Because the subframe is a large, well-located assembly, the changes caused by subframe bush wear accumulate slowly and are easy to normalise before the full extent of the degradation becomes apparent. By the time rear end handling feels vague or NVH has increased noticeably, subframe bush compliance has often drifted well beyond its designed operating range.

Replacing worn CL, CM ACCORD subframe bushes with correctly specified polyurethane alternatives restores correct subframe location and chassis compliance, delivering immediate and measurable improvements in rear end stability, cornering precision and NVH that reflect the full benefit of a freshly and correctly located rear suspension assembly. For performance vehicles where rear geometry consistency is critical to handling balance and traction, subframe bush renewal is among the highest-impact suspension improvements achievable at the bush replacement level.

CL, CM ACCORD Subframe Bush Range

The CL, CM ACCORD subframe bush range includes:

• CL, CM ACCORD Rear Subframe Bush Kits: Full polyurethane bush kits that replace all rear subframe to chassis mounting bushes, restoring correct rear subframe location and compliance.
• CL, CM ACCORD Rear Subframe Insert Bush Kits: Polyurethane insert kits that install directly into the existing bush shell without requiring shell removal, providing a more accessible renewal option.
• CL, CM ACCORD Front Subframe Bush Kits: Polyurethane bush kits that replace front subframe chassis mounting bushes.
• CL, CM ACCORD Subframe Outer Bush Kits: Performance spacer kits for the subframe outer mounting position, used in conjunction with the standard subframe bush kit on applicable performance platforms to increase subframe location stiffness.
• CL, CM ACCORD Subframe Traction Control Bush Kits: Combined kits covering rear subframe mount and differential mount positions in a single purchase.

Why Purchase CL, CM ACCORD Subframe Bushes?

Allowing worn subframe bushes to remain in service means the rear suspension assembly is operating from a mounting platform that moves under load, progressively compromising rear wheel geometry, handling balance and NVH with every kilometre driven. Renewing them with correctly specified polyurethane alternatives restores correct subframe location, eliminates mounting compliance drift and delivers a rear suspension assembly that performs from a stable, correctly positioned base.

For workshops completing suspension overhauls and servicing on performance and high-mileage vehicles, CL, CM ACCORD subframe bush renewal is a foundational step that addresses a structural-level cause of rear end handling degradation before individual suspension component renewal is carried out. For performance owners, quality polyurethane subframe bushes deliver a more direct, precise and stable rear end character that reflects the correct operation of the full rear suspension assembly.

Installation and Support

CL, CM ACCORD Subframe bush kits are designed for accurate installation at the front and rear subframe to chassis mounting positions. Installation times range from approximately one and a half to four hours depending on the application and kit type. Insert kits are designed to install into the existing bush shell without requiring full shell removal. Installation guides are available across most products to support both professional workshops and experienced DIY users. For additional technical assistance, a dedicated support team is available to help ensure correct product selection and kit variant for the specific application.

Repair and Upgrade

CL, CM ACCORD Subframe bushes are manufactured from high-strength polyurethane engineered to withstand the structural load, vibration and environmental exposure that subframe chassis mounting positions are subject to in everyday and demanding use. Resistant to oil, heat and road contaminants, polyurethane subframe bushes maintain their compliance characteristics and subframe location precision for longer than factory rubber alternatives, delivering more consistent rear suspension geometry and handling performance throughout their service life. Most products are backed by a lifetime warranty.

Who CL, CM ACCORD Subframe Bushes Are For

CL, CM ACCORD Subframe bushes are a practical solution for:

• Professional workshops completing suspension overhauls and high-mileage servicing on performance, passenger and AWD platforms requiring correct subframe bush renewal to restore correct subframe location before individual suspension component work is carried out.
• Performance and enthusiast vehicle owners renewing subframe bushes to restore or improve rear end stability, cornering precision and handling balance on platforms where subframe bush compliance directly affects rear wheel geometry and traction.
• Experienced DIY users replacing worn subframe mounting bushes to eliminate rear end NVH, restore correct subframe location and improve rear suspension performance across all driving conditions.
• Anyone experiencing rear end vagueness, increased NVH or handling inconsistency attributable to worn or deteriorated subframe mounting bushes at the chassis interface.

The right subframe bush kit restores correct subframe location and chassis compliance, eliminates mounting movement and delivers a more precise, stable and refined rear suspension performance from the ground up.

Shop CL, CM ACCORD Subframe Bushes

Explore the full CL, CM ACCORD subframe bushes range and find the right kit for your vehicle. With rear and front subframe bush kits, insert kits, performance outer spacer kits and traction control combined kits across a range of performance, passenger, AWD and European vehicle platforms, you can restore correct subframe location and complete every suspension overhaul with confidence.