Bushings with Fitting Position Front, Rear

Suspension bushings are the polyurethane bushing kits used to replace worn rubber bushings at every pivot, mount and interface point across the vehicle's suspension, steering, drivetrain and chassis systems. Every point where two suspension or chassis components connect through a compliant interface relies on a bushing to control the range and stiffness of movement at that joint. From control arm inner and outer positions to sway bar mounts, leaf spring eyes, subframe mounts, differential mounts, body mounts and steering rack mounts, the condition and specification of the bushing at each position directly affects suspension geometry, handling precision, steering response and the NVH transmitted into the cabin.

As factory rubber bushings deteriorate through load cycling, heat, road contamination and age, compliance drifts beyond designed tolerances at each affected position, introducing geometry inconsistency, handling vagueness, increased noise and accelerated wear at adjacent components. The US bushings range covers every suspension position across the full vehicle with individual position-specific bushing kits, full vehicle master bushing kits that renew every suspension bushing in a single purchase, essential and enhancement kits targeting the highest-impact positions, and universal dimensional kits for non-platform-specific applications. Individual installation guides are available across most products.

Why Upgrade Suspension?

Suspension bushing wear is cumulative and progressive. Each individual bushing that exceeds its designed compliance contributes a small amount of additional movement, geometry inconsistency and harshness that adds to every other worn bushing in the system. The result is a gradual but compounding deterioration in handling precision, steering response and ride quality that can be difficult to attribute to any single component until the overall degradation becomes significant.

Renewing bushings with correctly specified polyurethane alternatives addresses every worn compliance point simultaneously, eliminating the compounding effect of multiple worn bushings and restoring the suspension to a correctly compliant, correctly located baseline from which every other component can operate as designed. Polyurethane bushings resist load-induced deformation, heat, oil and road contamination more effectively than factory rubber, maintaining their compliance characteristics and geometry control for longer under both every day and demanding driving conditions.

Bushings Range

The bushings range includes:

• Vehicle Master Bushing Kits: Complete vehicle-specific kits supplying polyurethane bushing replacements for every suspension position across the full vehicle in a single purchase.
• Essential Vehicle Kits: Targeted kits supplying polyurethane bushings for the highest-impact and most worn suspension positions on the applicable vehicle platform.
• Vehicle Enhancement Kits: Front and rear bushing enhancement kits targeting the suspension positions that deliver the most measurable improvement in handling precision and geometry control on the applicable platform.
• Control Arm Bushing Kits: Individual front and rear upper and lower control arm inner and outer bushing kits, including standard replacement and camber/caster correction offset variants.
• Sway Bar Bushing Kits: Front and rear sway bar mount and end link bushing kits in vehicle-matched diameters and universal dimensionally specified sets across a wide range of bar diameters in both standard and greaseable designs.
• Leaf Spring Bushing Kits: Front and rear leaf spring eye, shackle, frame shackle and spring pad bushing kits for applicable RWD, 4WD and off-road platforms, including greaseable shackle hardware kits.
• Subframe Bushing Kits: Front and rear subframe mount and insert bushing kits for applicable passenger and performance platforms.
• Differential Bushing Kits: Front, rear and center differential mount bushing kits and differential carrier mount sets for applicable RWD, 4WD and AWD platforms.
• Trailing Arm Bushing Kits: Front, rear, lower, upper and center pivot trailing arm bushing kits for applicable passenger, performance and 4WD platforms.
• Steering Rack Bushing Kits: Steering rack and pinion mount bushing kits for power and manual steering rack applications across a wide range of platforms.
• Body Mount Bushing Kits: Full body mount bushing sets for standard cab, extended cab and crew cab configurations across applicable truck and 4WD platforms.
• Coil Spring Isolator and Spacer Kits: Front and rear coil spring isolators, spring pad bushings and lift spacer kits for applicable RWD and 4WD platforms.
• Shock Absorber Bushing Kits: Universal and platform-specific shock absorber eye bushing kits for upper and lower shock mount positions.
• Strut Rod Bushing Kits: Rear strut rod bushing sets for applicable passenger and performance platforms.
• Universal Bushing Kits: Dimensionally specified universal bushing kits for link, sway bar, spring eye and body mount applications where platform-specific kits are not required.

Why Purchase Bushings?

Polyurethane bushings address suspension wear at the compliance level, restoring correct geometry and reducing unwanted movement across every renewed position in a single service. For vehicles experiencing handling degradation, increased NVH or geometry inconsistency from high mileage or demanding use, bushing renewal is the most direct and cost-effective way to restore the suspension to a correctly operating baseline without requiring component replacement.

Vehicle Master Bushing Kits deliver the most complete renewal in a single purchase, ensuring every suspension position is addressed simultaneously and eliminating the geometry inconsistency that results from renewing only selected positions while others remain worn. Individual position kits allow targeted renewal at specific positions identified through alignment or inspection, providing the flexibility to address specific symptoms without a full vehicle renewal.

Compatible Vehicles

Suspension bushings are compatible with a wide range of vehicles, including:

• Domestic trucks, SUVs and pickups requiring control arm, body mount, leaf spring, sway bar and differential bushing replacement.
• Domestic performance and muscle cars requiring suspension and subframe bushing upgrades for improved handling.
• Japanese trucks, SUVs and 4WDs requiring leaf spring, control arm and body mount bushing renewal.
• Japanese and European passenger and performance vehicles requiring control arm, subframe, trailing arm and steering rack bushings.
• Off-road and lifted 4WDs needing bushing replacement to maintain correct suspension geometry.
• Any vehicle requiring suspension bushing renewal where a suitable vehicle-specific or universal kit is available.

Installation and Support

Suspension bushing kits are designed for installation at the specific chassis or suspension mounting position of each product. Installation times vary significantly by kit type and platform, ranging from under an hour for individual position kits to several hours for full vehicle master kits. Individual installation guides are available across most products. For additional technical assistance, a dedicated support team is available to help confirm correct product selection and bushing specification for the specific vehicle and suspension configuration.

Repair and Upgrade

Polyurethane suspension bushings are manufactured from high-strength polyurethane engineered to withstand the load cycling, road shock, heat and contamination that suspension and chassis mount positions are subject to in everyday, performance and off-road use. Resistant to oil, fuel, road contaminants and the compression set that shortens the service life of rubber alternatives, polyurethane bushings maintain their compliance characteristics and geometry control for longer, delivering more consistent suspension performance and reducing the frequency of renewal over the vehicle's service life.

Who Bushings Are For

Suspension bushings are a practical solution for:

• Workshop technicians performing suspension overhauls and high-mileage servicing on trucks, SUVs and performance vehicles.
• Performance and enthusiast drivers upgrading worn bushings to improve handling, steering response and stability.
• 4WD and off-road owners replacing bushings to maintain suspension geometry under load, towing and rough terrain.
• DIY builders and mechanics completing suspension rebuilds using vehicle-specific or universal bushing kits.

The right bushing kit restores correct compliance and geometry at every renewed position, eliminates worn bushing noise and handling degradation, and delivers a suspension system that operates precisely as designed under every driving condition.

Shop Bushings

Explore the full bushings range and find the right kit for your vehicle. With vehicle master bushing kits, essential and enhancement kits, individual control arm, sway bar, leaf spring, subframe, differential, trailing arm, steering rack, body mount, coil spring and universal bushing kits across a broad range of domestic, Japanese and European passenger, performance, truck and 4WD platforms, you can renew every suspension bushing position accurately and complete every suspension service with confidence.